™
OWNER'S MANUAL
MODEL
Subwoofer
CO104S
CO124S
CO154S
TABLE OF CONTENTS
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ7
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Deutsche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Italiano. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4ꢀ
Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ
Practice Safe Sound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ
Whats in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ꢀ
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Tools of the Trade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Finding Speaker Mounting Locations . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Wiring Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Enclosure Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ꢀ4
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back cover
INTRODUCTION
Thank you for your purchase of the Orion Cobalt Subwoofers. These woofers
represent a combination of incredible performance and value. We at Orion strive to
give you the latest up to date information about this product. What we can’t give you
with the manual is personal installation or technical experience. If you have questions
concerning the use or application of this product please refer to the nearest ORION
hotline at ꢀ-800-876-0800. As we are always finding new ways to improve our product,
the features and specifications are subject to change without notice.
PRACTICE SAFE SOUND™
Continuous exposure to sound pressure levels over ꢀ00dB may cause permanent
hearing loss. High powered automotive sound systems can generate sound pressure
levels in excess of ꢀ30dB. When playing your system at high levels, please use hearing
protection and prevent long term exposure.
Model Number: _______________
Serial Number:
_______________
Date of Purchase: _______________
© 2007 directed electronics—all rights reserved
ꢀ
WHAT’S IN THE BOx
Included in this box are all the necessary mounting hardware and cables for your basic
installation. Listed below is a detailed list of the components included in this system
package.
Quantity
Description
ꢀ
ꢀ
ꢀ
Installation and Operation Manual
TM
Orion
Cobalt woofer
Mounting template
Mounting screws
INSTALLATION
The performance of these Cobalt subwoofers is directly proportional to the quality
of the installation. Care taken with the installation process will be rewarded by
years of satisfying performance. If you are unsure of your installation abilities, please
refer to your local authorized ORION dealer for assistance. Orion dealers are trained
professionals dedicated to extracting the maximum performance out of your Orion
system. If you decide to install this speaker system yourself, please read the entire
section on sealed and vented enclosures before starting the installation. .
TOOLS OF THE TRADE
Listed are the majority of the tools required to perform the installation. Having the
proper tools will make the installation much easier. It is very difficult when you get
half way through the installation and discover that you require a specific tool to
get yourself through a particular part of the installation. Some of these tools are
necessities. Some make the job much easier.
• Marking Pen
• Phillips Screwdriver
• Allen Wrenches
• Table Saw
• Electric Drill and assorted Bits
• Wire Strippers
• Volt/Ohm Meter (Optional)
• Jig Saw
• Wire Cutters
• Wire Crimpers
FINDING SPEAKER MOUNTING LOCATIONS
Choosing the correct speaker locations will have the greatest effect on the
sound quality of the system. Different considerations are needed when choosing
the locations that best suit your needs. The locations must be large enough for
the speakers to fit. Care is needed to ensure that the location you have chosen
will not affect any of the mechanical or electrical operations of the vehicle.
Determining the best location for the speakers will depend on your cosmetic needs
and your vehicle's interior. If minimal intrusion in your vehicle is desired, factory
speaker locations may be the ticket for you. These woofers are too large to fit most
factory locations and typically need enclosures to perform correctly.
2
© 2007 directed electronics—all rights reserved
FEATURES
15
1
2
13
3
4
14
12
5
6
7
11
10
9
8
1
2
Polypropylene dust cap - moisture and UV resistant.
Oversized NBR (Nitrile-butadiene Rubber) surround for linear
controlled long excursion.
3
4
5
Vented paper cone - moisture and UV resistant.
Custom stamped steel frame.
Vented Kapton voice coil former (10” & 12" uses 1.5" voice coil
former, 15” use a 2" voice coil former).
6
7
8
9
8mm steel front plate.
Large 2 stack ceramic magnets.
8mm steel back plate/pole piece T yoke assembly.
.75" vent. Part of the enhanced voice coil cooling system (forced
convection).
10
11
12
PVC magnet protector.
High temperature Copper 4 ohm voice coil.
Venting in voice coil former. Part of the enhanced voice coil cooling
system (forced convection).
13
Interlaced Conex spider with stitched and looped tinsel leads
attached.
14
15
Push Terminals.
Reversible PVC mounting gasket.
© 2007 directed electronics—all rights reserved
3
WIRING CONFIGURATIONS
The following illustrations provide guidelines on properly connecting your
Orion Cobalt woofer to an Orion Cobalt amplifier for maximum performance.
Recommended Amplifier Power
Continuous Power (RMS)
ꢀ00 to 300
Peak Power (Watts)
200 to 600
ꢀ woofer
2 woofers
3 woofers
4 woofers
200 to 600
400 to ꢀ200
300 to 900
600 to ꢀ800
400 to ꢀ200
800 to 2400
Parallel—Two Speakers ( 4 ohm voice coils)
Two 4 ohm voice coil woofers with the two woofers in parallel results in a 2 ohm load
to the amplifier..
_
_
4 ohm
4 ohm
+
+
Figure 2
Figura 2
Abbildung 2
+
_
ꢀ. Connect the speaker in parallel by connecting the two positive (+) terminals
together and the two negative (-) terminals together.
2. Wire the positive (+) terminals of the woofers to the positive (+) terminal on
the amplifier. Wire the negative (-) terminals of the woofers to the negative (-)
terminal on the amplifier.
4
© 2007 directed electronics—all rights reserved
One Speaker (4 ohm voice coil)
One 4 ohm voice coil woofer results in a 4 ohm load to the amplifier.
_
4 ohm
+
Figure 3
Figura 3
Abbildung 3
+
_
ꢀ. Connect the speaker by connecting the positive (+) terminal of the woofer to
the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the
woofer to the negative (-) terminal on the amplifier.
© 2007 directed electronics—all rights reserved
5
Series—Two Speakers (Single 4 ohm voice coils)
Two single 4 ohm voice coil subwoofers with the voice coils connected in series to
result in an 8 ohm load to the amplifier.
_
_
4 ohm
4 ohm
+
+
Figure 4
Figura 4
Abbildung 4
+
_
ꢀ. Connect the woofers in series by connecting the negative (-) terminal of the first
woofer voice coil to the positive (+) terminal of the second woofer voice coil.
2. Wire the positive (+) terminal of the first woofer voice coil to the positive (+)
terminal on the amplifier. Wire the negative (-) terminal of the second woofer
voice coil to the negative (-) terminal on the amplifier.
6
© 2007 directed electronics—all rights reserved
Series/Parallel - 4 Speakers (Single 4 Ohm Coils)
4 single 4 ohm voice coil subwoofers with the voice coils of each pair of speaker wired
in series and then all 4 speakers wired in parallel to result in a 4 ohm load on the
amplifier.
_
+
_
_
_
4 ohm
4 ohm
4 ohm
4 ohm
1
2
3
4
+
+
+
Figure 5
Figura 5
Abbildung 5
+
_
ꢀ. Connect the negative (-) terminal from speaker ꢀ to the negative terminal on
speaker 3 and then hook that wire to the negative (-) terminal on the amplifier.
2. Connect the positive (+) terminal from speaker ꢀ to the negative (-) terminal on
speaker 2.
3. Connect the positive (+) terminal from speaker 3 to the negative (-) terminal on
speaker 4.
4. Connect the positive (+) terminal from speaker 2 to the positive (+) terminal on
speaker 4 and then hook that wire to the positive (+) terminal on the amplifer.
© 2007 directed electronics—all rights reserved
7
ENCLOSURE RECOMMENDATIONS
Enclosure Details
ꢀ. External dimensions calculated for 3/4” building material
2. Includes speaker displacement
3. Volumes given are net tuning volume
4. Enclosures include a minimal amount of damping material. Just enough material
to line the inside of the enclosure is required.
Cobalt COꢀ04S Sealed Enclosure Recommendations
External Dimensions
A = 14 in
B = 12.5 in
C = 11.5 in
Internal Dimensions
A = 12.5 in
A
B = 11 in
C = 10 in
Wall Thickness
Front = 0.75 in
Side = 0.75 in
C
B
—Box Parts—
Box Shape: Square Prism
1 Top, 1 Bottom:
Top &
Bottom
c
depth (c) = 11.5 in
width (b) = 12.5,
thickness = 0.75 in
1 Front, 1 Back:
b
d
height (a) = 12.5 in
width (d) = 11,
c
thickness = 0.75 in
2 Sides: height (a) = 12.5 in
depth (c) = 11.5,
Front &
Back
Sides
a
thickness = 0.75 in
—Driver Mounting—
Front
Figure 6
Figura 6
Abbildung 6
8
© 2007 directed electronics—all rights reserved
Cobalt CO104S Vented Enclosure Recommendations
Figure 7
Figura 7
Abbildung 7
External Dimensions
A = 15.75 in
B = 14.25 in
C = 12 in
Internal Dimensions
A = 14.25 in
A
B = 12.75 in
C = 10.5 in
Wall Thickness
Front = 0.75 in
Side = 0.75 in
C
B
—Box Parts—
Box Shape: Square Prism
1 Top, 1 Bottom:
depth (c) = 12 in
width (b) = 14.25,
thickness = 0.75 in
1 Front, 1 Back:
height (a) = 14.25 in
width (d) = 12.75,
thickness = 0.75 in
2 Sides:
Top &
Bottom
c
b
d
c
Front &
Back
height (a) = 14.25 in
depth (c) = 12,
Sides
a
thickness = 0.75 in
—Driver Mounting—
Front
VENT Round
h
e
g
Vent Parts --- Round
1 Duct: outside diameter (e) = 3.2
inside diameter (g) = 3 in
length (h) = 9.5 in
- OR -
VENT Square
e
Vent Parts --- Square
1 Top, 1 Bottom:
width (e) = 3,
length (h) = 10 in
thickness = 0.125 in
2 Sides:
h
height (g) = 2.75,
length (h) = 10 in
thickness = 0.125 in
h
g
© 2007 directed electronics—all rights reserved
9
Cobalt CO124S Sealed Enclosure Recommendations
External Dimensions
A = 15.5 in
B = 14.75 in
C = 12 in
Internal Dimensions
A = 14 in
A
B = 13.25 in
C = 10.5 in
Wall Thickness
Front = 0.75 in
Side = 0.75 in
C
B
—Box Parts—
Box Shape: Square Prism
1 Top, 1 Bottom:
depth (c) = 12 in
Top &
Bottom
c
width (b) = 14.75,
thickness = 0.75 in
1 Front, 1 Back:
b
d
height (a) = 14 in
width (d) = 13.25,
thickness = 0.75 in
c
2 Sides:
height (a) = 14 in
depth (c) = 12,
thickness = 0.75 in
Front &
Back
Sides
a
Driver Mounting
Mounting: Front
Figure 8
Figura 8
Abbildung 8
ꢀ0
© 2007 directed electronics—all rights reserved
Cobalt CO124S Vented Enclosure Recommendations
Figure 9
Figura 9
Abbildung 9
External Dimensions
A = 18 in
B = 16.75 in
C = 13 in
Internal Dimensions
A = 16.5 in
A
B = 15.25 in
C = 11.5 in
Wall Thickness
Front = 0.75 in
Side = 0.75 in
C
B
—Box Parts—
Box Shape: Square Prism
1 Top, 1 Bottom:
depth (c) = 13 in
width (b) = 16.75,
thickness = 0.75 in
1 Front, 1 Back:
height (a) = 16.5 in
width (d) = 15.25,
thickness = 0.75 in
2 Sides:
Top &
Bottom
c
b
d
c
Front &
Back
height (a) = 16.5 in
depth (c) = 13,
Sides
a
thickness = 0.75 in
Driver Mounting
Mounting: Front
VENT Round
h
e
g
Vent Parts --- Round
1 Duct:
outside diameter (e) = 4.25
inside diameter (g) = 4 in
length (h) = 10 in
- OR -
VENT Square
e
Vent Parts --- Square
1 Top, 1 Bottom:
width (e) = 3.75,
length (h) = 10 in
thickness = 0.125 in
2 Sides:
h
h
height (g) = 3.5,
length (h) = 10 in
thickness = 0.125 in
g
© 2007 directed electronics—all rights reserved
ꢀꢀ
Cobalt CO154S Sealed Enclosure Recommendations
External Dimensions
A = 25 in
B = 17.5 in
C = 11.5 in
Internal Dimensions
A = 23.5 in
A
B = 16 in
C = 10 in
Wall Thickness
Front = 0.75 in
Side = 0.75 in
C
B
—Box Parts—
Box Shape: Square Prism
1 Top, 1 Bottom:
depth (c) = 11.5 in
Top &
Bottom
c
width (b) = 17.5,
thickness = 0.75 in
1 Front, 1 Back:
b
d
height (a) = 23.5 in
width (d) = 16,
c
thickness = 0.75 in
2 Sides:
height (a) = 23.5 in
depth (c) = 11.5,
thickness = 0.75 in
Front &
Back
Sides
a
Driver Mounting
Mounting: Front
Figure 10
Figura 10
Abbildung 10
ꢀ2
© 2007 directed electronics—all rights reserved
Cobalt CO154S Vented Enclosure Recommendations
Figure 11
Figura 11
Abbildung 11
External Dimensions
A = 25 in
B = 17.5 in
C = 13 in
Internal Dimensions
A = 23.5 in
A
B = 16 in
C = 11.5 in
Wall Thickness
Front = 0.75 in
Side = 0.75 in
C
B
—Box Parts—
Box Shape: Square Prism
1 Top, 1 Bottom:
depth (c) = 13 in
width (b) = 17.5,
thickness = 0.75 in
1 Front, 1 Back:
height (a) = 23.5 in
width (d) = 16,
Top &
Bottom
c
b
d
c
thickness = 0.75 in
2 Sides:
Front &
Back
height (a) = 23.5 in
depth (c) = 13,
Sides
a
e
thickness = 0.75 in
Driver Mounting
Mounting: Front
VENT Round
h
g
Vent Parts --- Round
1 Duct: outside diameter (e)
inside diameter (g) = 4 in
length (h) = 7 in
- OR -
VENT Square
e
Vent Parts --- Square
1 Top, 1 Bottom:
width (e) = 4.25,
length (h) = 7 in
thickness = 0.125 in
2 Sides:
h
height (g) = 4,
h
length (h) = 7 in
thickness = 0.125 in
g
© 2007 directed electronics—all rights reserved
ꢀ3
SPECIFICATIONS
Directed Part Number
COꢀ04S
32ꢀ00
COꢀ24S
32ꢀ05
COꢀ54S
32ꢀꢀ5
Model Number
Thiele/Small Parameters
Fs (free-air resonance, Hz)
Vas (equivalent compliance, cu. ft.)
Vas (equivalent compliance, liters)
Qms (Q, mechanical)
39.2
ꢀ.080
30.600
3.53
0.68
0.57
3.6
25.6
25.2
7.098
20ꢀ.070
6.08
0.5ꢀ
0.47
3.77
4
4.0ꢀ7
ꢀꢀ3.790
4.72
Qes (Q, electrical)
0.55
Qts (total driver Q)
0.49
Re (DC resistance, ohms)
Z (nominal impedance, ohms)
Le (inductance, mh)
3.55
4
4
ꢀ.38
86.ꢀ
ꢀ.37
ꢀ.6ꢀ
89.9
0.453
ꢀꢀ.5
250
Efficiency (ꢀW @ ꢀM, dB)
87.2
xmax (one way linear excursion, in.) 0.406
0.4ꢀ0
ꢀ0.4075
200
xmax (one way linear excursion, mm) ꢀ0.2925
Pe (continuous power handling,
watts)
200
Peak power handling (music, watts)
Mms (total moving mass, grams)
400
500
600
ꢀ0ꢀ.00
ꢀ27
ꢀ95
Cms (mechanical compliance, mm/N) 0.ꢀ80564
0.29472ꢀ
ꢀꢀ.6ꢀ
0.2ꢀꢀ994
ꢀ4.82
Bl (motor strength, Tesla-M)
Sd (effective radiating area, sq. cm.)
Sd (effective radiating area, sq. in.)
Frequency range (Hz)
ꢀ0.88
346.36ꢀ
53.706
522.792
8ꢀ.064
8ꢀ9.398
ꢀ27.055
39 - 250Hz 25 - 250Hz 25 - 250Hz
Energy Bandwidth Product (EBP)
Driver Physical Dimension
58
47
49
Speaker Displacement (cu ft)
0.048
0.06ꢀ
0.ꢀꢀ6
Speaker Outer Diameter (inches/mm) ꢀ0.3ꢀ/ 262 ꢀ2.40/ 3ꢀ5 ꢀ5.40/ 39ꢀ
Mounting hole diameter (inches/mm) 9.23/ 232 ꢀ0.9ꢀ/ 277 ꢀ3.82/ 35ꢀ
Mounting depth (inches/mm)
Magnet Weight (Oz)
5.ꢀ2/ ꢀ30
38.60
5.5ꢀ/ ꢀ40
4ꢀ
6.46/ ꢀ64
70
Basket diameter (inches/mm)
Recommended Enclosures
Typical sealed enclosure (cu. ft.)
ꢀ0.ꢀ6/258
ꢀ2.2ꢀ/3ꢀ0
ꢀ5.ꢀ6/385
0.75
ꢀ
2
Specifications subject to change without notice
ꢀ4
© 2007 directed electronics—all rights reserved
A
B
C
D
E
Figure ꢀ2
Figura ꢀ2
Abbildung ꢀ2
CO104S
CO124S
CO154S
Dimensions inches/mm, Dimensions po/mm, Dimensiones
plg./mm, Abmessungen Zoll/mm, Dimensioni
pollici/millimetri, Dimensões polegadas/mm
A
B
C
D
E
5.ꢀ2/ꢀ30
ꢀ.97/50
5.5ꢀ/ꢀ40
ꢀ.97/50
6.46/ꢀ64
2.0ꢀ/5ꢀ
4.96/ꢀ26
9.ꢀ3/232
ꢀ0.ꢀ6/258
5.00/ꢀ27
ꢀ0.9ꢀ/277
ꢀ2.20/3ꢀ0
5.7ꢀ/ꢀ45
ꢀ3.82/35ꢀ
ꢀ5.ꢀ6/385
© 2007 directed electronics—all rights reserved
ꢀ5
FRANÇAIS
CARACTÉRISTIQUES
15
1
2
13
3
4
14
12
5
6
7
11
1
2
Cache-poussière en polypropylène — résiste à l'humidité et aux
ultraviolets
Panneau surdimensionné en nitrile pour un mouvement long à contrôle
linéaire
3
4
5
Membrane de papier ventilée — résiste à l'humidité et aux ultra-violets
Cadre sur mesure en acier matricé
Gabarit ventilé Kapton de bobine acoustique (les modèles 10” et 12"
utilisent le gabarit 1,5", le modèle 15” utilisent le gabarit 2")
6
7
8
9
Platine avant en acier de 8 mm
2 grands aimants en céramique
Platine arrière/collier T polaire en acier 8 mm
Évent de 0,75". Élément du système amélioré de refroidissement de la
bobine acoustique (convection forcée)
10 Protecteur d'aimant en PVC
11 Bobine acoustique 4 ohms en cuivre résistant aux hautes températures
12 Évent du gabarit de bobine acoustique. Élément du système amélioré de
refroidissement de la bobine acoustique (convection forcée)
13 Anneau de centrage Conex entrelacé avec fils rosettes piqués et bouclés
joints
14 Bornes-poussoirs
15 Joint de montage réversible en PVC
© 2007 directed electronics—all rights reserved
ꢀ7
CONFIGURATIONS DE CÂBLAGE
Les illustrations suivantes fournissent des indications sur le câblage correct de votre
haut-parleur Orion Cobalt à un amplificateur Orion Cobalt pour un rendement optimal.
Puissance d'amplificateur recommandée
Puissance continue (RMS)
ꢀ00 à 300
Puissance de crête (watts)
200 à 600
ꢀ haut-parleur
2 haut-parleurs 200 à 600
3 haut-parleurs 300 à 900
4 haut-parleurs 400 à ꢀ200
400 à ꢀ200
600 à ꢀ800
800 à 2400
Parallèle — Deux haut-parleurs (bobines acoustiques 4 ohms)
Deux haut-parleurs à bobine acoustique de 4 ohms en parallèle résultent en une
charge de 2 ohms pour l'amplificateur.
ꢀ. Raccordez le haut-parleur en parallèle en raccordant les deux bornes positives (+)
d'une part et les deux bornes négatives (-) d'autre part.
2. Raccordez les bornes positives (+) des haut-parleurs à la borne positive (+) de
l'amplificateur. Raccordez les bornes négatives (-) des haut-parleurs à la borne
négative (-) de l'amplificateur (figure 2).
Un haut-parleur (bobine acoustique 4 ohms)
Un haut-parleur à bobine acoustique de 4 ohms résulte en une charge de 4 ohms pour
l'amplificateur.
ꢀ. Raccordez le haut-parleur en raccordant la borne positive (+) du haut-parleur à
la borne positive (+) de l'amplificateur. Raccordez la borne négative (-) du haut-
parleur à la borne négative (-) de l'amplificateur (figure 3).
Série — Deux haut-parleurs (bobines acoustiques simples 4 ohms)
Deux haut-parleurs à bobine acoustique simple de 4 ohms en série résultent en une
charge de 8 ohms pour l'amplificateur.
ꢀ. Raccordez le haut-parleur en série en raccordant la borne négative (-) d'une
bobine à la borne positive (+) de l'autre bobine.
2. Raccordez la borne positive (+) de la première bobine à la borne positive (+) de
l'amplificateur. Raccordez la borne négative (-) de la seconde bobine à la borne
négative (-) de l'amplificateur (figure 4).
ꢀ8
© 2007 directed electronics—all rights reserved
Série/parallèle — 4 haut-parleurs (bobines 4 ohms simples)
Quatre caissons de basses à bobines acoustiques simples de 4 ohms, les bobines
acoustiques de chaque paire de haut-parleurs raccordées en série et les quatre
haut-parleurs raccordés en parallèle, résultent en une charge de 4 ohms pour
l'amplificateur.
ꢀ. Raccordez la borne négative (-) du haut-parleur #ꢀ à la borne négative du haut-
parleur #3, puis raccordez ce câble à la borne négative (-) de l'amplificateur.
2. Raccordez la borne positive (+) du haut-parleur #ꢀ à la borne négative du haut-
parleur #2.
3. Raccordez la borne positive (+) du haut-parleur #3 à la borne négative du haut-
parleur #4.
4. Raccordez la borne positive (+) du haut-parleur #2 à la borne positive (+) du
haut-parleur #4, puis raccordez ce câble à la borne positive (+) de l'amplificateur
(figure 5).
NOTE: Diagramme de référence aux pages 4 - 7
RECOMMANDATIONS SUR LES ENCEINTES
Détails des enceintes
ꢀ. Dimensions externes calculées pour des matériaux de 3/4”
2. Inclut le volume d'encombrement des haut-parleurs
3. Les volumes indiqués sont le volume d'accord net
4. Les enceintes contiennent une quantité minimale de matériaux d'amortissement. Il
suffit de prévoir assez de tissu pour le revêtement intérieur de l'enceinte.
© 2007 directed electronics—all rights reserved
ꢀ9
Recommandations pour l'enceinte
close Cobalt CO104S (Figure 6)
Recommandations pour l'enceinte
ventilée Cobalt CO104S (Figure 7)
Dimensions externes
A = ꢀ5,75"
B = ꢀ4,25"
C = ꢀ2"
Dimensions internes
A = ꢀ4,25"
B = ꢀ2,75"
C = ꢀ0,5"
Épaisseur de la cloison
Avant = 0,75"
Côté = 0,75"
Dimensions externes
A = ꢀ4"
B = ꢀ2,5"
C = ꢀꢀ,5"
Dimensions internes
A = ꢀ2,5"
B = ꢀꢀ"
C = ꢀ0"
Épaisseur de la cloison
Avant = 0,75"
Côté = 0,75"
— Parties du boîtier —
Forme: prisme carré
ꢀ haut, ꢀ bas:
— Parties du boîtier —
Forme: prisme carré
ꢀ haut, ꢀ bas
Profondeur (c) = ꢀ2"
Largeur (b) = ꢀ4,25"
Épaisseur = 0,75"
ꢀ avant, ꢀ arrière:
Hauteur (a) = ꢀ4,25"
Profondeur (d) = ꢀ2,75"
Épaisseur = 0,75"
2 côtés:
Profondeur (c) = ꢀꢀ,5"
Largeur (b) = ꢀ2,5"
Épaisseur = 0,75"
ꢀ avant, ꢀ arrière
Hauteur (a) = ꢀ2,5"
Profondeur (d) = ꢀꢀ"
Épaisseur = 0,75"
2 côtés: Hauteur (a) = ꢀ2,5"
Profondeur (c) = ꢀꢀ,5"
Épaisseur = 0,75"
Hauteur (a) = ꢀ4,25"
Profondeur (c) = ꢀ2"
Épaisseur = 0,75"
— Montage moteur —
Avant
— Montage moteur —
Avant
Pièces d'évent — rond
ꢀ conduit: diamètre extérieur (e) = 3,25"
Diamètre intérieur (g) = 3"
Longueur (h) = 9,5"
Pièces d'évent — carré
ꢀ haut, ꢀ bas:
Largeur (e) = 3"
Longueur (h) = ꢀ0"
Épaisseur = 0,ꢀ25"
2 côtés:
Hauteur (g) = 2,75"
Longueur (h) = ꢀ0"
Épaisseur = 0,ꢀ25"
NOTE: Diagramme de référence aux pages 8 - ꢀ3
20
© 2007 directed electronics—all rights reserved
Recommandations pour l'enceinte
close Cobalt CO124S (Figure 8)
Recommandations pour l'enceinte
ventilée Cobalt CO124S (Figure 9)
Dimensions externes
A = ꢀ5,5"
Dimensions externes
A = ꢀ8"
B = ꢀ4,75"
B = ꢀ6,75"
C = ꢀ2"
C = ꢀ3"
Dimensions internes
A = ꢀ4"
Dimensions internes
A = ꢀ6,5"
B = ꢀ3,25"
B = ꢀ5,25"
C = ꢀ0,5"
C = ꢀꢀ,5"
Épaisseur de la cloison
Avant = 0,75"
Côté = 0,75"
Épaisseur de la cloison
Avant = 0,75"
Côté = 0,75"
— Parties du boîtier —
Forme: prisme carré
ꢀ haut, ꢀ bas:
— Parties du boîtier —
Forme: prisme carré
ꢀ haut, ꢀ bas:
Profondeur (c) = ꢀ2"
Largeur (b) = ꢀ4,75"
Épaisseur = 0,75"
ꢀ avant, ꢀ arrière:
Hauteur (a) = ꢀ4"
Profondeur (d) = ꢀ3,25"
Épaisseur = 0,75"
2 côtés:
Profondeur (c) = ꢀ3"
Largeur (b) = ꢀ6,75"
Épaisseur = 0,75"
ꢀ avant, ꢀ arrière:
Hauteur (a) = ꢀ6,5"
Profondeur (d) = ꢀ5,25"
Épaisseur = 0,75"
2 côtés:
Hauteur (a) = ꢀ4"
Profondeur (c) = ꢀ2"
Épaisseur = 0,75"
Hauteur (a) = ꢀ6,5"
Profondeur (c) = ꢀ3"
Épaisseur = 0,75"
— Montage moteur —
Avant
— Montage moteur —
Avant
Pièces d'évent — rond
ꢀ conduit: Diamètre extérieur (e) = 4,25"
Diamètre intérieur (g) = 4"
Longueur (h) = ꢀ0"
Pièces d'évent — carré
ꢀ haut, ꢀ bas:
Largeur (e) = 3,75"
Longueur (h) = ꢀ0"
Épaisseur = 0,ꢀ25"
2 côtés:
Hauteur (g) = 3,5"
Longueur (h) = ꢀ0"
Épaisseur = 0,ꢀ25"
© 2007 directed electronics—all rights reserved
2ꢀ
Recommandations pour l'enceinte
close Cobalt CO154S (Figure 10)
Recommandations pour l'enceinte
ventilée Cobalt CO154S (Figure 11)
Dimensions externes
A = 25"
Dimensions externes
A = 25"
B = ꢀ7,5"
B = ꢀ7,5"
C = ꢀꢀ,5"
C = ꢀ3"
Dimensions internes
A = 23,5"
Dimensions internes
A = 23,5"
B = ꢀ6"
B = ꢀ6"
C = ꢀ0"
C = ꢀꢀ,5"
Épaisseur de la cloison
Avant = 0,75"
Côté = 0,75"
Épaisseur de la cloison
Avant = 0,75"
Côté = 0,75"
— Parties du boîtier —
Forme: prisme carré
ꢀ haut, ꢀ bas:
— Parties du boîtier —
Forme: prisme carré
ꢀ haut, ꢀ bas:
Profondeur (c) = ꢀꢀ,5"
Largeur (b) = ꢀ7,5"
Épaisseur = 0,75"
ꢀ avant, ꢀ arrière:
Hauteur (a) = 23,5"
Profondeur (d) = ꢀ6"
Épaisseur = 0,75"
2 côtés:
Profondeur (c) = ꢀ3"
Largeur (b) = ꢀ7,5"
Épaisseur = 0,75"
ꢀ avant, ꢀ arrière:
Hauteur (a) = 23,5"
Profondeur (d) = ꢀ6"
Épaisseur = 0,75"
2 côtés:
Hauteur (a) = 23,5"
Profondeur (c) = ꢀꢀ,5"
Épaisseur = 0,75"
Hauteur (a) = 23,5"
Profondeur (c) = ꢀ3"
Épaisseur = 0,75"
— Montage moteur —
Avant
— Montage moteur —
Avant
Pièces d'évent — rond
ꢀ conduit: diamètre extérieur (e) = 4,25"
Diamètre intérieur (g) = 4"
Longueur (h) = 7"
Pièces d'évent — carré
ꢀ haut, ꢀ bas:
Largeur (e) = 4,25"
Longueur (h) = 7"
Épaisseur = 0,ꢀ25"
2 côtés:
Hauteur (g) = 4"
Longueur (h) = 7"
Épaisseur = 0,ꢀ25"
22
© 2007 directed electronics—all rights reserved
SPÉCIFICATIONS
Numéro de pièce Directed
COꢀ04S
32ꢀ00
COꢀ24S
32ꢀ05
COꢀ54S
32ꢀꢀ5
Numéro de modèle
Paramètres Thiele/Small
Fs (résonance air libre, Hz)
39.2
25.6
25.2
7.098
20ꢀ.070
6.08
0.5ꢀ
0.47
3.77
4
Vas (volume d'air équivalent, pi cu)
Vas (volume d'air équivalent, litres)
Qms (facteur de qualité mécanique)
Qes (facteur de qualité électrique)
Qts (facteur de qualité total)
Re (résistance CC, ohms)
ꢀ.080
30.600
3.53
4.0ꢀ7
ꢀꢀ3.790
4.72
0.68
0.55
0.57
0.49
3.6
3.55
Z (impédance nominale, ohms)
Le (inductance, mh)
4
4
ꢀ.38
ꢀ.37
ꢀ.6ꢀ
89.9
0.453
ꢀꢀ.5
250
Efficacité (ꢀW @ ꢀM, dB)
86.ꢀ
87.2
xmax (déplacement de la bobine, po)
xmax (déplacement de la bobine, mm)
Pe (puissance continue, watts)
Puissance de pointe (musique, watts)
Mms (masse mobile totale, grammes)
0.406
ꢀ0.2925
200
0.4ꢀ0
ꢀ0.4075
200
400
500
600
ꢀ0ꢀ.00
0.ꢀ80564
ꢀ27
ꢀ95
Cms (élasticité de suspension
de la membrane, mm/N)
0.29472ꢀ
0.2ꢀꢀ994
Bl (puissance du moteur, Tesla-M)
ꢀ0.88
ꢀꢀ.6ꢀ
ꢀ4.82
Sd (surface émissive de la
membrane, cm²)
346.36ꢀ
522.792
8ꢀ9.398
Sd (surface émissive de la membrane, po²) 53.706
8ꢀ.064
ꢀ27.055
25 - 250Hz
49
Gamme de fréquences (Hz)
39 - 250Hz 25 - 250Hz
Produit du rendement par la
bande passante (EBP)
58
47
Dimensions du moteur
Encombrement du haut-parleur (pi cu)
0.048
0.06ꢀ
0.ꢀꢀ6
Diamètre extérieur du haut-
parleur (po/mm)
ꢀ0.3ꢀ/ 262 ꢀ2.40/ 3ꢀ5
ꢀ5.40/ 39ꢀ
Diamètre du trou de montage (po/mm)
Profondeur de montage (po/mm)
Poids de l'aimant (oz)
9.23/ 232
5.ꢀ2/ ꢀ30
38.60
ꢀ0.9ꢀ/ 277
5.5ꢀ/ ꢀ40
4ꢀ
ꢀ3.82/ 35ꢀ
6.46/ ꢀ64
70
Diamètre du panier (po/mm)
Enceintes recommandées
ꢀ0.ꢀ6/258
ꢀ2.2ꢀ/3ꢀ0
ꢀ5.ꢀ6/385
Enceinte close typique (pi cu)
Spécifications sujettes à changement sans préavis
0.75
ꢀ
2
© 2007 directed electronics—all rights reserved
23
ESPAÑOL
CARACTERÍSTICAS
15
1
2
13
3
4
14
12
5
6
7
11
1
2
3
Tapa de polipropileno contra el polvo; resistente a la humedad y a los
rayos ultravioleta.
Envolvente grande de Goma de Butadieno de Nitrilo (Nitrile Butadiene
Rubber, NBR) para grandes desplazamientos lineales controlados.
Cono de papel ventilado; resistente a la humedad y a los rayos
ultravioleta.
4
5
Armazón de acero troquelado a la medida.
Formador de bobina de voz Kapton ventilado (1.5 plg. para altavoces de
10 y 12 plg., 2 plg. para altavoces de 15 plg.)
6
7
8
Plancha delantera de acero de 8 mm.
Imanes grandes de cerámica de dos pilas.
Unidad de yugo en T de pieza polar y plancha trasera de acero de 8
mm.
9
Respiradero de 0.75 plg.; parte del sistema de enfriamiento de bobina de
voz mejorado (convección forzada).
10 Protector de imán de PVC.
11 Bobina de voz de 4Ω de cobre de alta temperatura.
12 Respiradero en el formador de la bobina de voz; parte del sistema de
enfriamiento de bobina de voz mejorado (convección forzada).
13 Araña Conex entrelazada con conductores de oropel bordado y
enlazado.
14 Terminales a presión.
15 Junta de montaje de PVC reversible.
© 2007 directed electronics—all rights reserved
25
CONFIGURACIONES DE CABLEADO
Las siguientes ilustraciones contienen las pautas para conectar correctamente el woofer
Orion Cobalt a un amplificador Orion Cobalt a fin de lograr el rendimiento máximo..
Potencia de amplificador recomendada
Potencia continua (RMS)
ꢀ00 a 300
Potencia máxima (W)
200 a 600
ꢀ woofer
2 woofers
3 woofers
4 woofers
200 a 600
400 a ꢀ200
300 a 900
600 a ꢀ800
400 a ꢀ200
800 a 2400
En paralelo. Dos altavoces (una bobina de voz de 4 Ω cada uno)
Dos woofers, con una bobina de voz de 4 Ω cada uno y las bobinas de voz en paralelo
producen una carga de 2 Ω en el amplificador..
ꢀ. Conecte el altavoz en paralelo conectando las dos terminales positivas (+) entre sí
y las dos terminales negativas (-) entre sí.
2. Conecte las terminales positivas (+) de los woofers a la terminal positiva (+) del
amplificador. Conecte las terminales negativas (-) de los woofers a la terminal
negativa (-) del amplificador (figura 2).
Un altavoz (una bobina de voz de 4 Ω)
Un woofer con bobina de voz de 4 Ω produce una carga de 4 Ω en el amplificador.
ꢀ. Conecte el altavoz conectando la terminal positiva (+) del woofer a la terminal
positiva (+) del amplificador. Conecte la terminal negativa (-) del woofer a la
terminal negativa (-) del amplificador (figura 3).
En serie. Dos altavoces (una bobina de voz de 4 Ω cada uno)
Dos subwoofers, con una bobina de voz de 4 Ω cada uno y las bobinas de voz en serie
producen una carga de 8 Ω en el amplificador.
ꢀ. Conecte el woofer en serie conectando la terminal negativa (-) de una de las
bobinas a la terminal positiva (+) de la otra bobina.
2. Conecte la terminal positiva (+) de la primera bobina a la terminal positiva (+) del
amplificador. Conecte la terminal negativa (-) de la segunda bobina a la terminal
negativa (-) del amplificador (figura 4).
26
© 2007 directed electronics—all rights reserved
En serie / en paralelo. 4 altavoces (una bobina de voz de 4 Ω cada uno)
Cuatro subwoofers, con una bobina de voz de 4 Ω cada uno, las bobinas de voz
de cada par en serie y los 4 altavoces en paralelo producen una carga de 4 Ω en el
amplificador.
ꢀ. Conecte la terminal negativa (-) del altavoz ꢀ a la terminal negativa (-) del altavoz
3 y luego conecte esa terminal a la terminal negativa (-) del amplificador.
2. Conecte la terminal positiva (+) del altavoz ꢀ a la terminal negativa (-) del altavoz
2
3. Conecte la terminal positiva (+) del altavoz 3 a la terminal negativa (-) del altavoz
4
4. Conecte la terminal positiva (+) del altavoz 2 a la terminal positiva (+) del altavoz
4 y luego conecte esa terminal a la terminal positiva (+) del amplificador. (figura
5)
Consulte el diagrama de las páginas 4 - 7
RECOMENDACIONES PARA LA CAJA
Detalles de la caja
ꢀ. Las dimensiones externas se han calculado para un material de construcción de ¾
plg. de grosor
2. Incluye el desplazamiento del altavoz
3. Los volúmenes que se dan son volúmenes de sintonización neta
4. Las cajas contienen una cantidad mínima de material amortiguador. Se necesita
sólo material suficiente para recubrir la superficie interna de la caja.
© 2007 directed electronics—all rights reserved
27
Recomendaciones para la caja
sellada Cobalt CO104S (figura 6)
Recomendaciones para la caja
ventilada Cobalt CO104S (figura 7)
Dimensiones externas
A = ꢀ5.75 plg.
B = ꢀ4.25 plg.
C = ꢀ2 plg.
Dimensiones externas
A = ꢀ4 plg.
B = ꢀ2.5 plg.
C = ꢀꢀ.5 plg.
Dimensiones internas
A = ꢀ4.25 plg.
B = ꢀ2.75 plg.
Dimensiones internas
A = ꢀ2.5 plg.
B = ꢀꢀ plg.
C = ꢀ0.5 plg.
C = ꢀ0 plg.
Grosor de la pared
Delantera = 0.75 plg.
Lateral = 0.75 plg.
Grosor de la pared
Delantera = 0.75 plg.
Lateral = 0.75 plg.
— Piezas de la caja —
Forma de la caja: prisma cuadrado
ꢀ arriba, ꢀ abajo:
fondo (c) = ꢀ2 plg.
ancho (b) = ꢀ4.25 plg.
grosor = 0.75 plg.
— Piezas de la caja —
Forma de la caja: prisma cuadrado
ꢀ arriba, ꢀ abajo:
fondo (c) = ꢀꢀ.5 plg.
ancho (b) = ꢀ2.5 plg.
grosor = 0.75 plg.
ꢀ adelante, ꢀ atrás:
altura (a) = ꢀ4.25 plg.
ancho (d) = ꢀ2.75 plg.
grosor = 0.75 plg.
ꢀ adelante, ꢀ atrás:
altura (a) = ꢀ2.5 plg.
ancho (d) = ꢀꢀ plg.
grosor = 0.75 plg.
ꢀ a cada lado:
ꢀ a cada lado:
altura (a) = ꢀ4.25 plg.
fondo (c) = ꢀ2 plg.
grosor = 0.75 plg.
altura (a) = ꢀ2.5 plg.
fondo (c) = ꢀꢀ.5 plg.
grosor = 0.75 plg.
— Montaje del excitador —
Adelante
— Montaje del excitador —
Adelante
Piezas del respiradero --- redondo
ꢀ conducto: diámetro externo (e) = 3.25 plg.
diámetro interno (g) = 3 plg.
longitud (h) = 9.5 plg.
Piezas del respiradero --- cuadrado
ꢀ arriba, ꢀ abajo:
ancho (e) = 3 plg.
longitud (h) = ꢀ0 plg.
grosor = 0.ꢀ25 plg.
ꢀ a cada lado:
altura (g) = 2.75 plg.
longitud (h) = ꢀ0 plg.
grosor = 0.ꢀ25 plg.
Consulte el diagrama de las páginas 8 - ꢀ3
28
© 2007 directed electronics—all rights reserved
Recomendaciones para la caja
sellada Cobalt CO124S (figura 8)
Recomendaciones para la caja
ventilada Cobalt CO124S (figura 9)
Dimensiones externas
A = ꢀ5.5 plg.
Dimensiones externas
A = ꢀ8 plg.
B = ꢀ4.75 plg.
C = ꢀ2 plg.
B = ꢀ6.75 plg.
C = ꢀ3 plg.
Dimensiones internas
A = ꢀ4 plg.
Dimensiones internas
A = ꢀ6.5 plg.
B = ꢀ3.25 plg.
C = ꢀ0.5 plg.
B = ꢀ5.25 plg.
C = ꢀꢀ.5 plg.
Grosor de la pared
Delantera = 0.75 plg.
Lateral = 0.75 plg.
Grosor de la pared
Delantera = 0.75 plg.
Lateral = 0.75 plg.
— Piezas de la caja —
Forma de la caja: prisma cuadrado
ꢀ arriba, ꢀ abajo:
— Piezas de la caja —
Forma de la caja: prisma cuadrado
ꢀ arriba, ꢀ abajo:
fondo (c) = ꢀ2 plg.
fondo (c) = ꢀ3 plg.
ancho (b) = ꢀ4.75 plg.
grosor = 0.75 plg.
ancho (b) = ꢀ6.75 plg.
grosor = 0.75 plg.
ꢀ adelante, ꢀ atrás:
altura (a) = ꢀ4 plg.
ancho (d) = ꢀ3.25 plg.
grosor = 0.75 plg.
ꢀ adelante, ꢀ atrás:
altura (a) = ꢀ6.5 plg.
ancho (d) = ꢀ5.25 plg.
grosor = 0.75 plg.
ꢀ a cada lado:
ꢀ a cada lado:
altura (a) = ꢀ4 plg.
fondo (c) = ꢀ2 plg.
grosor = 0.75
altura (a) = ꢀ6.5 plg.
fondo (c) = ꢀ3 plg.
grosor = 0.75 plg.
Montaje del excitador
Montaje: adelante
Montaje del excitador
Montaje: adelante
Piezas del respiradero --- redondo
ꢀ conducto: diámetro externo (e) = 4.25 plg.
diámetro interno (g) = 4 plg.
longitud (h) = ꢀ0 plg.
Piezas del respiradero --- cuadrado
ꢀ arriba, ꢀ abajo:
ancho (e) = 3.75 plg.
longitud (h) = ꢀ0 plg.
grosor = 0.ꢀ25 plg.
ꢀ a cada lado:
altura (g) = 3.5 plg.
longitud (h) = ꢀ0 plg.
grosor = 0.ꢀ25 plg.
© 2007 directed electronics—all rights reserved
29
Recomendaciones para la caja
Recomendaciones para la caja
sellada Cobalt CO154S (figura 10)
sellada Cobalt CO154S (figura 11)
Dimensiones externas
A = 25 plg.
Dimensiones externas
A = 25 plg.
B = ꢀ7.5 plg.
B = ꢀ7.5 plg.
C = ꢀꢀ.5 plg.
C = ꢀ3 plg.
Dimensiones internas
A = 23.5 plg.
B = ꢀ6 plg.
Dimensiones internas
A = 23.5 plg.
B = ꢀ6 plg.
C = ꢀ0 plg.
C = ꢀꢀ.5 plg.
Grosor de la pared
Delantera = 0.75 plg.
Lateral = 0.75 plg.
Grosor de la pared
Delantera = 0.75 plg.
Lateral = 0.75 plg.
— Piezas de la caja —
Forma de la caja: prisma cuadrado
ꢀ arriba, ꢀ abajo:
— Piezas de la caja —
Forma de la caja: prisma cuadrado
ꢀ arriba, ꢀ abajo:
fondo (c) = ꢀꢀ.5 plg.
ancho (b) = ꢀ7.5 plg.
grosor = 0.75 plg.
fondo (c) = ꢀ3 plg.
ancho (b) = ꢀ7.5 plg.
grosor = 0.75 plg.
ꢀ adelante, ꢀ atrás:
altura (a) = 23.5 plg.
ancho (d) = ꢀ6 plg.
grosor = 0.75 plg.
ꢀ adelante, ꢀ atrás:
altura (a) = 23.5 plg.
ancho (d) = ꢀ6 plg.
grosor = 0.75 plg.
ꢀ a cada lado:
ꢀ a cada lado:
altura (a) = 23.5 plg.
fondo (c) = ꢀꢀ.5 plg.
grosor = 0.75 plg.
altura (a) = 23.5 plg.
fondo (c) = ꢀ3 plg.
grosor = 0.75 plg.
Montaje del excitador
Montaje: adelante
Montaje del excitador
Montaje: adelante
Piezas del respiradero --- redondo
ꢀ conducto: diámetro externo (e) = 4.25 plg.
diámetro interno (g) = 4 plg.
longitud (h) = 7 plg.
Piezas del respiradero --- cuadrado
ꢀ arriba, ꢀ abajo:
ancho (e) = 4.25 plg.
longitud (h) = 7 plg.
grosor = 0.ꢀ25 plg.
ꢀ a cada lado:
altura (g) = 4 plg.
longitud (h) = 7 plg.
grosor = 0.ꢀ25 plg.
30
© 2007 directed electronics—all rights reserved
ESPECIFICACIONES
Número de pieza dirigido
Número de modelo
COꢀ04S
32ꢀ00
COꢀ24S
32ꢀ05
COꢀ54S
32ꢀꢀ5
Parámetros Thiele/Small
Fs (resonancia al aire libre, Hz)
39.2
25.6
25.2
7.098
20ꢀ.070
6.08
0.5ꢀ
0.47
3.77
4
Vas (cumplimiento de equivalencia, pies3) ꢀ.080
Vas (cumplimiento de equivalencia, litros) 30.600
4.0ꢀ7
ꢀꢀ3.790
4.72
Qms (Q, mecánico)
3.53
0.68
0.57
3.6
Qes (Q, eléctrico)
0.55
Qts (Q total del excitador)
Re (resistencia CC, Ω)
Z (impedancia nominal, Ω)
Le (inductancia, mH)
Eficiencia (ꢀ W a ꢀ m, dB)
0.49
3.55
4
4
ꢀ.38
86.ꢀ
ꢀ.37
ꢀ.6ꢀ
89.9
0.453
ꢀꢀ.5
250
87.2
xmax (desplazamiento lineal de ida plg.) 0.406
0.4ꢀ0
ꢀ0.4075
200
xmax (desplazamiento lineal de ida, mm) ꢀ0.2925
Pe (procesamiento continuo
de potencia, W)
200
Procesamiento máximo de
potencia (música, W)
400
500
600
Mms (masa total en movimiento, g)
Cms (cumplimiento mecánico, mm/N)
Bl (fuerza del motor, Tesla-m)
ꢀ0ꢀ.00
0.ꢀ80564
ꢀ0.88
ꢀ27
ꢀ95
0.29472ꢀ
ꢀꢀ.6ꢀ
0.2ꢀꢀ994
ꢀ4.82
Sd (área de radiación efectiva, cm²)
Sd (área de radiación efectiva plg.²)
Gama de frecuencias (Hz)
346.36ꢀ
53.706
39 - 250Hz
58
522.792
8ꢀ.064
25 - 250Hz
47
8ꢀ9.398
ꢀ27.055
25 - 250Hz
49
Producto ancho de banda energía (EBP)
Dimensiones físicas del excitador
Desplazamiento del altavoz (pies³)
Diámetro externo del altavoz (plg./mm)
0.048
0.06ꢀ
0.ꢀꢀ6
ꢀ0.3ꢀ/ 262
9.23/ 232
ꢀ2.40/ 3ꢀ5
ꢀ0.9ꢀ/ 277
ꢀ5.40/ 39ꢀ
ꢀ3.82/ 35ꢀ
Diámetro del agujero de
montaje (plg./mm)
Profundidad de montaje (plg./mm)
Peso del imán (oz.)
5.ꢀ2/ ꢀ30
38.60
5.5ꢀ/ ꢀ40
4ꢀ
6.46/ ꢀ64
70
Diámetro de la canasta (plg./mm)
Cajas recomendadas
ꢀ0.ꢀ6/258
ꢀ2.2ꢀ/3ꢀ0
ꢀ5.ꢀ6/385
Caja sellada normal (pies³)
0.75
ꢀ
2
Especificaciones sujetas a cambio sin aviso previo
© 2007 directed electronics—all rights reserved
3ꢀ
DEUTSCHE
HÖHEPUNKTE
15
1
2
13
3
4
14
12
5
6
7
11
1
2
Feuchtigkeits- und UV-beständige Polypropylen-Abdeckung
Extra große Sicke aus NBR (Nitrilgummi) für linear kontrollierten
Langhub
3
4
5
Belüftete feuchtigkeits- und UV-beständige Papiermembran
Spezieller Stahlblechrahmen
Belüfteter Kapton-Schwingspulenträger (10- und 12-Zoll-Modell
verwendet 1,5-Zoll-Schwingspulenträger, 15-Zoll-Modell einen 2-Zoll-
Schwingspulenträger)
6
7
8
9
8-mm dickes vorderes Abdeckblech
Große Double-Stack-Keramikmagneten
8-mm dickes hinteres Abdeckblech/Polplatten-T-Stück
0,75-Zoll-Öffnung. Teil des verbesserten Schwingspulen-Kühlsystems
(Zwangs-Konvektion)
10
11
12
PVC-Magnetschutz
Hochtemperatur-Kupferschwingspule (4 Ohm)
Belüftung des Schwingspulenträgers. Teil des verbesserten
Schwingspulen-Kühlsystems (Zwangs-Konvektion)
13
Verknüpfte Conex-Zentriermembran mit gehefteten und geschleiften
Zuleitungslitzen
14
15
Druck-Terminals
Umkehrbare PVC-Befestigungsdichtung
© 2007 directed electronics—all rights reserved
33
SCHALTKONFIGURATIONEN
Die folgenden Abbildungen zeigen, wie Sie Ihren Orion Cobalt-Tieftöner richtig an
einen Orion Cobalt-Verstärker anschließen, um die maximale Leistung herauszuholen.
Empfohlene Verstärkerleistung
RMS-Dauerleistung
ꢀ00 bis 300
Spitzenleistung (Watt)
200 bis 600
ꢀ Tieftöner
2 Tieftöner
3 Tieftöner
4 Tieftöner
200 bis 600
400 bis ꢀ200
300 bis 900
600 bis ꢀ800
400 bis ꢀ200
800 bis 2400
Parallel — Zwei Lautsprecher (4-Ohm-Schwingspulen)
Zwei parallel geschaltete Tieftöner mit 4-Ohm-Schwingspulen: Lastwiderstand von 2
Ohm am Verstärker
ꢀ. Schließen Sie den Lautsprecher parallel an, indem Sie jeweils die beiden positiven
(+) Terminals und die beiden negativen (-) Terminals miteinander verbinden.
2. Verbinden Sie die positiven (+) Terminals der Tieftöner mit dem positiven (+)
Terminal am Verstärker. Verbinden Sie die negativen (+) Terminals der Tieftöner
mit dem negativen (+) Terminal am Verstärker (abbildung 2).
Ein Lautsprecher (4-Ohm-Schwingspule)
Ein Tieftöner mit 4-Ohm-Schwingspule: Lastwiderstand von 4 Ohm am Verstärker.
ꢀ. Schließen Sie den Lautsprecher an, indem Sie das positive (+) Terminal des
Tieftöners mit dem positiven (+) Terminal am Verstärker verbinden. Verbinden
Sie das negative (-) Terminal des Tieftöners mit dem negativen (+) Terminal am
Verstärker (abbildung 3).
Reihe — Zwei Lautsprecher (Einzelne 4-Ohm-Schwingspulen)
Zwei einzelne in Reihe geschaltete Subwoofer mit 4-Ohm-Schwingspulen:
Lastwiderstand von 8 Ohm am Verstärker.
ꢀ. Schließen Sie die Tieftöner in Reihe an, indem Sie das negative (-) Terminal der
ersten Tieftöner-Schwingspule mit dem positiven (+) Terminal der zweiten Spule
verbinden.
2. Verbinden Sie das positive (+) Terminal der ersten Tieftöner-Schwingspule mit dem
positiven (+) Terminal am Verstärker. Verbinden Sie das negative (-) Terminal der
zweiten Tieftöner-Schwingspule mit dem negativen (-) Terminal am Verstärker
(abbildung 4).
34
© 2007 directed electronics—all rights reserved
Reihe/Parallel - 4 Lautsprecher (Einzelne 4-Ohm-Schwingspulen)
4 einzelne Subwoofer mit 4-Ohm-Schwingspulen, bei denen die Schwingspulen jedes
Lautsprecherpaars in Reihe geschaltet und dann alle 4 Lautsprecher parallel geschaltet
sind: Lastwiderstand von 4 Ohm am Verstärker
ꢀ. Schließen Sie das negative (-) Terminal an Lautsprecher ꢀ an das negative Terminal
an Lautsprecher 3 an und verbinden Sie diesen Draht mit dem negativen (-)
Terminal am Verstärker.
2. Verbinden Sie das positive (+) Terminal am Lautsprecher ꢀ mit dem negativen (-)
Terminal am Lautsprecher 2.
3. Verbinden Sie das positive (+) Terminal am Lautsprecher 3 mit dem negativen (-)
Terminal am Lautsprecher 4.
4. Schließen Sie das positive (+) Terminal an Lautsprecher 2 an das positive (+)
Terminal an Lautsprecher 4 an und verbinden Sie diesen Draht mit dem positiven
(+) Terminal am Verstärker (abbildung 5).
Siehe Diagramm auf Seite 4 - 7
GEHÄUSEEMPFEHLUNGEN
Gehäusedetails
ꢀ. Für Baumaterial mit ¾ Zoll (ꢀ,9 cm) Dicke berechnete Außenmaße
2. Einschließlich Lautsprecherhub
3. Angegebene Volumen sind Netto-Tuningvolumen
4. Gehäuse besitzen ein Minimum an Dämpfungsmaterial. Es ist gerade genug
Material zur Auskleidung der Innenseite des Gehäuses nötig.
© 2007 directed electronics—all rights reserved
35
Cobalt CO104S Geschlossenes Gehäuse: Cobalt CO104S Bassreflex-Gehäuse:
Empfehlungen (abbildung 6)
Empfehlungen (abbildung 7)
Außenmaße
Außenmaße
A = ꢀ4 Zoll (35,6 cm)
B = ꢀ2,5 Zoll (3ꢀ,8 cm)
C = ꢀꢀ,5 Zoll (29,2 cm)
A = ꢀ5,75 Zoll (40 cm)
B = ꢀ4,25 Zoll (36,2 cm)
C = ꢀ2 Zoll (30,5 cm)
Innenmaße
Innenmaße
A = ꢀ2,5 Zoll (3ꢀ,8 cm)
B = ꢀꢀ Zoll (27,9 cm)
C = ꢀ0 Zoll (25,4 cm)
A = ꢀ4,25 Zoll (36,2 cm)
B = ꢀ2,75 Zoll (32,4 cm)
C = ꢀ0,5 Zoll (26,7 cm)
Wandstärke
Wandstärke
Vorn = 0,75 Zoll (ꢀ,9 cm)
Seite = 0,75 Zoll (ꢀ,9 cm)
Vorn = 0,75 Zoll (ꢀ,9 cm)
Seite = 0,75 Zoll (ꢀ,9 cm)
— Gehäuseteile —
— Gehäuseteile —
Gehäuseform: Quader
Gehäuseform: Quader
ꢀ Oberseite, ꢀ Unterseite:
Tiefe (c) = ꢀꢀ,5 Zoll (29,2 cm)
Breite (b) = ꢀ2,5 Zoll (3ꢀ,8 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Oberseite, ꢀ Unterseite:
Tiefe (c) = ꢀ2 Zoll (30,5 cm)
Breite (b) = ꢀ4,25 Zoll (36,2 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Vorderseite, ꢀ Rückseite:
Höhe (a) = ꢀ2,5 Zoll (3ꢀ,8 cm)
Breite (d) = ꢀꢀ Zoll (27,9 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Vorderseite, ꢀ Rückseite:
Höhe (a) = ꢀ4,25 Zoll (36,2 cm)
Breite (d) = ꢀ2,75 Zoll (32,4 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
2 Seiten:
2 Seiten:
Höhe (a) = ꢀ2,5 Zoll (3ꢀ,8 cm)
Tiefe (c) = ꢀꢀ,5 Zoll (29,2 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
Höhe (a) = ꢀ4,25 Zoll (36,2 cm)
Tiefe (c) = ꢀ2 Zoll (30,5 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
— Treibereinbau —
Vorn
— Treibereinbau —
Vorn
Öffnungsteile - Rund
ꢀ Kanal: Außendurchmesser (e) = 3,25 Zoll
(8,3 cm)
Innendurchmesser (g) = 3 Zoll (7,6 cm)
Länge (h) = 9,5 Zoll (24,ꢀ cm)
Öffnungsteile - Quadratisch
ꢀ Oberseite, ꢀ Unterseite:
Breite (e) = 3 Zoll (7,6 cm)
Länge (h) = ꢀ0 Zoll (25,4 cm)
Dicke = 0,ꢀ25 Zoll (0,3 cm)
2 Seiten:
Höhe (g) = 2,75 Zoll (7 cm)
Länge (h) = ꢀ0 Zoll (25,4 cm)
Dicke = 0,ꢀ25 Zoll (0,3 cm)
Siehe Diagramm auf Seite 8 - ꢀ3
36
© 2007 directed electronics—all rights reserved
Cobalt CO124S Geschlossenes Gehäuse: Cobalt CO124S Bassreflex-Gehäuse:
Empfehlungen (abbildung 8)
Empfehlungen (abbildung 9)
Außenmaße
Außenmaße
A = ꢀ5,5 Zoll (39,4 cm)
B = ꢀ4,75 Zoll (37,5 cm)
C = ꢀ2 Zoll (30,5 cm)
A = ꢀ8 Zoll (45,7 cm)
B = ꢀ6,75 Zoll (42,5 cm)
C = ꢀ3 Zoll (33 cm)
Innenmaße
Innenmaße
A = ꢀ4 Zoll (35,6 cm)
B = ꢀ3,25 Zoll (33,7 cm)
C = ꢀ0,5 Zoll (26,7 cm)
A = ꢀ6,5 Zoll (4ꢀ,9 cm)
B = ꢀ5,25 Zoll (38,7 cm)
C = ꢀꢀ,5 Zoll (29,2 cm)
Wandstärke
Wandstärke
Vorn = 0,75 Zoll (ꢀ,9 cm)
Seite = 0,75 Zoll (ꢀ,9 cm)
Vorn = 0,75 Zoll (ꢀ,9 cm)
Seite = 0,75 Zoll (ꢀ,9 cm)
— Gehäuseteile —
— Gehäuseteile —
Gehäuseform: Quader
Gehäuseform: Quader
ꢀ Oberseite, ꢀ Unterseite:
Tiefe (c) = ꢀ2 Zoll (30,5 cm)
Breite (b) = ꢀ4,75 Zoll (37,5 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Oberseite, ꢀ Unterseite:
Tiefe (c) = ꢀ3 Zoll (33 cm)
Breite (b) = ꢀ6,75 Zoll (42,5 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Vorderseite, ꢀ Rückseite:
Höhe (a) = ꢀ4 Zoll (35,6 cm)
Breite (d) = ꢀ3,25 Zoll (33,7 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Vorderseite, ꢀ Rückseite:
Höhe (a) = ꢀ6,5 Zoll (4ꢀ,9 cm)
Breite (d) = ꢀ5,25 Zoll (38,7 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
2 Seiten:
2 Seiten:
Höhe (a) = ꢀ4 Zoll (35,6 cm)
Tiefe (c) = ꢀ2 Zoll (30,5 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
Höhe (a) = ꢀ6,5 Zoll (4ꢀ,9 cm)
Tiefe (c) = ꢀ3 Zoll (33 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
Treibereinbau
Einbau: Vorn
Treibereinbau
Einbau: Vorn
Öffnungsteile - Rund
ꢀ Kanal:
Außendurchmesser (e) = 4,25 Zoll (ꢀ0,8 cm)
Innendurchmesser (g) = 4 Zoll (ꢀ0,2 cm)
Länge (h) = ꢀ0 Zoll (25,4 cm)
Öffnungsteile - Quadratisch
ꢀ Oberseite, ꢀ Unterseite:
Breite (e) = 3,75 Zoll (9,5 cm)
Länge (h) = ꢀ0 Zoll (25,4 cm)
Dicke = 0,ꢀ25 Zoll (0,3 cm)
2 Seiten:
Höhe (g) = 3,5 Zoll (8,9 cm)
Länge (h) = ꢀ0 Zoll (25,4 cm)
Dicke = 0,ꢀ25 Zoll (0,3 cm)
© 2007 directed electronics—all rights reserved
37
Cobalt CO154S Geschlossenes Gehäuse: Cobalt CO154S Bassreflex-Gehäuse:
Empfehlungen (abbildung 10)
Empfehlungen (abbildung 11)
Außenmaße
Außenmaße
A = 25 Zoll (63,5 cm)
B = ꢀ7,5 Zoll (44,5 cm)
C = ꢀꢀ,5 Zoll (29,2 cm)
A = 25 Zoll (63,5 cm)
B = ꢀ7,5 Zoll (44,5 cm)
C = ꢀ3 Zoll (33 cm)
Innenmaße
Innenmaße
A = 23,5 Zoll (59,7 cm)
B = ꢀ6 Zoll (40,6 cm)
C = ꢀ0 Zoll (25,4 cm)
A = 23,5 Zoll (59,7 cm)
B = ꢀ6 Zoll (40,6 cm)
C = ꢀꢀ,5 Zoll (29,2 cm)
Wandstärke
Wandstärke
Vorn = 0,75 Zoll (ꢀ,9 cm)
Seite = 0,75 Zoll (ꢀ,9 cm)
Vorn = 0,75 Zoll (ꢀ,9 cm)
Seite = 0,75 Zoll (ꢀ,9 cm)
— Gehäuseteile —
— Gehäuseteile —
Gehäuseform: Quader
Gehäuseform: Quader
ꢀ Oberseite, ꢀ Unterseite:
Tiefe (c) = ꢀꢀ,5 Zoll (29,2 cm)
Breite (b) = ꢀ7,5 Zoll (44,5 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Oberseite, ꢀ Unterseite:
Tiefe (c) = ꢀ3 Zoll (33 cm)
Breite (b) = ꢀ7,5 Zoll (44,5 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Vorderseite, ꢀ Rückseite:
Höhe (a) = 23,5 Zoll (59,7 cm)
Breite (d) = ꢀ6 Zoll (40,6 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
ꢀ Vorderseite, ꢀ Rückseite:
Höhe (a) = 23,5 Zoll (59,7 cm)
Breite (d) = ꢀ6 Zoll (40,6 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
2 Seiten:
2 Seiten:
Höhe (a) = 23,5 Zoll (59,7 cm)
Tiefe (c) = ꢀꢀ,5 Zoll (29,2 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
Höhe (a) = 23,5 Zoll (59,7 cm)
Tiefe (c) = ꢀ3 Zoll (33 cm)
Dicke = 0,75 Zoll (ꢀ,9 cm)
Treibereinbau
Einbau: Vorn
Treibereinbau
Einbau: Vorn
Öffnungsteile - Rund
ꢀ Kanal: Außendurchmesser (e) = 4,25 Zoll
(ꢀ0,8 cm)
Innendurchmesser (g) = 4 Zoll (ꢀ0,2 cm)
Länge (h) = 7 Zoll (ꢀ7,8 cm)
Öffnungsteile – Quadratisch ꢀ Oberseite, ꢀ
Unterseite:
Breite (e) = 4,25 Zoll (ꢀ0,8 cm)
Länge (h) = 7 Zoll (ꢀ7,8 cm)
Dicke = 0,ꢀ25 Zoll (0,3 cm)
2 Seiten:
Höhe (g) = 4 Zoll (ꢀ0,2 cm)
Länge (h) = 7 Zoll (ꢀ7,8 cm)
Dicke = 0,ꢀ25 Zoll (0,3 cm)
38
© 2007 directed electronics—all rights reserved
DATEN
Directed-Teilenummer
Modellnummer
COꢀ04S
32ꢀ00
COꢀ24S
32ꢀ05
COꢀ54S
32ꢀꢀ5
Thiele/Small-Parameter
Fs (Freiluftresonanz, Hz)
39.2
25.6
25.2
Vas (Äquivalente Nachgiebigkeit, Kubikfuß) ꢀ.080
4.0ꢀ7
ꢀꢀ3.790
4.72
7.098
20ꢀ.070
6.08
Vas (Äquivalente Nachgiebigkeit, Liter)
Qms (Q, mechanisch)
30.600
3.53
Qes (Q, elektrisch)
0.68
0.55
0.5ꢀ
Qts (totaler Treiberwert für Q)
Re (GS-Widerstand, Ohm)
0.57
0.49
0.47
3.6
3.55
3.77
Z (Nennimpedanz, Ohm)
4
4
4
Le (Induktivität, mh)
ꢀ.38
ꢀ.37
ꢀ.6ꢀ
Wirkungsgrad (ꢀ W bei ꢀ M, dB)
xmax (linearer Hub in eine Richtung, Zoll)
xmax (linearer Hub in eine Richtung, mm)
Pe (Dauerbelastbarkeit, Watt)
Spitzenbelastbarkeit (Watt)
86.ꢀ
87.2
89.9
0.406
ꢀ0.2925
200
0.4ꢀ0
ꢀ0.4075
200
0.453
ꢀꢀ.5
250
400
500
600
Mms (Bewegte Gesamtmasse, Gramm)
Cms (mechanische Nachgiebigkeit, mm/N)
Bl (Motorstärke, Tesla-M)
ꢀ0ꢀ.00
0.ꢀ80564
ꢀ0.88
346.36ꢀ
ꢀ27
ꢀ95
0.29472ꢀ
ꢀꢀ.6ꢀ
522.792
0.2ꢀꢀ994
ꢀ4.82
8ꢀ9.398
Sd (effektiver Strahlbereich,
Quadratzentimeter)
Sd (effektiver Strahlbereich, Quadratzoll)
Frequenzbereich (Hz)
53.706
8ꢀ.064
ꢀ27.055
39 - 250Hz 25 - 250Hz 25 - 250Hz
Verstärkungs-Bandbreitenprodukt (EBP)
Abmessungen des Treibers
58
47
49
Lautsprecherhub (Kubikfuß)
Lautsprecher-Außendurchmesser (Zoll/mm)
Einbaulochdurchmesser (Zoll/mm)
Einbautiefe (Zoll/mm)
0.048
0.06ꢀ
0.ꢀꢀ6
ꢀ0.3ꢀ/ 262 ꢀ2.40/ 3ꢀ5 ꢀ5.40/ 39ꢀ
9.23/ 232
5.ꢀ2/ ꢀ30
38.60
ꢀ0.9ꢀ/ 277 ꢀ3.82/ 35ꢀ
5.5ꢀ/ ꢀ40
4ꢀ
6.46/ ꢀ64
70
Magnetgewicht (Unzen)
Korbdurchmesser (Zoll/mm)
Empfohlene Gehäuse
ꢀ0.ꢀ6/258 ꢀ2.2ꢀ/3ꢀ0
ꢀ5.ꢀ6/385
Typisches geschlossenen Gehäuse (Kubikfuß) 0.75
ꢀ
2
Daten können ohne vorherige Ankündigung geändert werden
© 2007 directed electronics—all rights reserved
39
ITALIANO
CARATTERISTICHE
15
1
2
13
3
4
14
12
5
6
7
11
1
2
Protezione parapolvere in polipropilene - resistente all'umidità e ai
raggi ultravioletti.
Surround maggiorato in NBR (gomma nitrile butadiene) per lunga
escursione lineare controllata.
3
4
5
Cono aperto in carta - resistente all'umidità e ai raggi ultravioletti.
Telaio in acciaio stampato su misura.
Supporto aperto della bobina mobile in Kapton (i diffusori da 10” e 12"
usano un supporto da 1,5", quelli da 15” usano un supporto da 2").
6
7
8
9
Piastra anteriore in acciaio da 8 mm.
2 grandi magneti ceramici in cascata.
Piastra posteriore in acciaio da 8 mm/staffa a T per i poli.
Aperturada19mm(0,75").Partedelsistemamiglioratodiraffreddamento
della bobina mobile (a convezione forzata).
10
11
12
Protezione del magnete in PVC.
Bobina mobile da 4 ohm in rame ad alta temperatura.
Aperture di ventilazione del supporto della bobina mobile. Parte del
sistema migliorato di raffreddamento della bobina mobile (a convezione
forzata).
13
14
15
Centratore in Conex intrecciato con fili conduttori applicati e avvolti.
Terminali a pressione.
Guarnizione di montaggio in PVC rovesciabile.
© 2007 directed electronics—all rights reserved
4ꢀ
CONFIGURAZIONI DI CABLAGGIO
Le illustrazioni seguenti presentano delle indicazioni di massima su come collegare
correttamente un woofer Orion Cobalt a un amplificatore Orion Cobalt in modo da
ottenere le massime prestazioni.
Potenza raccomandata dell'amplificatore
Potenza continua (RMS)
da ꢀ00 a 300
Potenza di picco (watt)
da 200 a 600
ꢀ woofer
2 woofers
3 woofers
4 woofers
da 200 a 600
da 400 a ꢀ200
da 300 a 900
da 600 a ꢀ800
da 400 a ꢀ200
da 800 a 2400
Due diffusori in parallelo (bobine mobili da 4 ohm)
Due woofer con bobine mobili da 4 ohm in parallelo causano un carico di 2 ohm
sull'amplificatore.
ꢀ. Collegare i diffusori in parallelo collegando tra loro i due terminali positivi (+) e i
due terminali negativi (-).
2. Collegare i terminali positivi (+) dei woofer al terminale positivo (+)
dell'amplificatore. Collegare i terminali negativi (-) dei woofer al terminale
negativo (-) dell'amplificatore (figura 2).
Un diffusore (bobina mobile da 4 ohm)
Un woofer con bobina mobile da 4 ohm causa un carico di 4 ohm sull'amplificatore.
ꢀ. Collegare il terminale positivo (+) del woofer al terminale positivo (+)
dell'amplificatore. Collegare il terminale negativo (-) del woofer al terminale
negativo (-) dell'amplificatore (figura 3).
Due diffusori in serie (con bobine mobili da 4 ohm)
Due subwoofer, ciascuno con una con bobina mobile da 4 ohm, collegati in serie
causano un carico di 8 ohm sull'amplificatore.
ꢀ. Collegare i woofer in serie collegando il terminale negativo (-) della bobina
mobile del primo woofer al terminale positivo (+) della bobina mobile del
secondo woofer.
2. Collegare il terminale positivo (+) della bobina mobile del primo woofer al
terminale positivo (+) dell'amplificatore. Collegare il terminale negativo (-) della
bobina mobile del secondo woofer al terminale negativo (-) dell'amplificatore
(figura 4).
42
© 2007 directed electronics—all rights reserved
4 diffusori collegati in serie-parallelo (con bobine mobili da 4 ohm)
4 subwoofer con una con bobina mobile da 4 ohm ciascuno, e con le bobine mobili
di ogni coppia di diffusori collegate in serie e tutti i 4 diffusori collegati tra loro in
parallelo, causano un carico di 4 ohm sull'amplificatore.
ꢀ. Collegare il terminale negativo (-) del diffusore ꢀ al terminale negativo (-) del
diffusore 3 e quindi collegare il filo al terminale negativo (-) dell'amplificatore.
2. Collegare il terminale positivo (+) del diffusore ꢀ al terminale negativo (-) del
diffusore 2.
3. Collegare il terminale positivo (+) del diffusore 3 al terminale negativo (-) del
diffusore 4.
4. Collegare il terminale positivo (+) del diffusore 2 al terminale positivo (+) del
diffusore 4 e quindi collegare il filo al terminale positivo (+) dell'amplificatore
(figura 5).
Vedere lo schema a pagina 4 - 7
RACCOMANDAZIONI PER LA CASSA
Dettagli della cassa
ꢀ. Le misure esterne sono calcolate in base a un materiale da costruzione spesso ꢀ9
mm (0,75 in).
2. Comprendono il volume interno del diffusore.
3. I volumi indicati sono netti.
4. La cassa comprende una quantità minima di materiale di riempimento. Occorre
solo il materiale stret¬tamente sufficiente per allineare l'interno della cassa.
© 2007 directed electronics—all rights reserved
43
Raccomandazioni per la cassa
Raccomandazioni per la cassa
sigillata Cobalt CO104S (figura 6)
aperta Cobalt CO104S (figura 7)
DDimensioni esterne
A = 3ꢀ,7 cm (ꢀ5,75 in)
B = 28 cm (ꢀ4,25 in)
C = 25,4 cm (ꢀ2 in)
Dimensioni esterne
A = 35,5 cm (ꢀ4 in)
B = 3ꢀ,7 cm (ꢀ2,5 in)
C = 29,2 cm (ꢀꢀ,5 in)
Dimensioni interne
A = 3ꢀ,7 cm (ꢀ4,25 in)
B = 28 cm (ꢀ2,75 in)
C = 25,4 cm (ꢀ0,5 in)
Dimensioni interne
A = 3ꢀ,7 cm (ꢀ2,5 in)
B = 28 cm (ꢀꢀ in)
C = 25,4 cm (ꢀ0 in)
Spessore delle pareti
Anteriore = ꢀ,9 cm (0,75 in)
Laterale = ꢀ,9 cm (0,75 in)
Spessore delle pareti
Anteriore = ꢀ,9 cm (0,75 in)
Laterale = ꢀ,9 cm (0,75 in)
— Parti della cassa —
Forma della cassa: prisma quadrato
ꢀ superiore, ꢀ inferiore:
profondità (c) = 29,2 cm (ꢀ2 in)
larghezza (b) = 3ꢀ,7 cm (ꢀ4,25 in) = ꢀ4,25
spessore = ꢀ,9 cm (0,75 in)
— Parti della cassa —
Forma della cassa: prisma quadrato
ꢀ superiore, ꢀ inferiore:
profondità (c) = 29,2 cm (ꢀꢀ,5 in)
larghezza (b) = 3ꢀ,7 cm (ꢀ2,5 in)
spessore = ꢀ,9 cm (0,75 in)
ꢀ anteriore, ꢀ posteriore
ꢀ anteriore, ꢀ posteriore
altezza (a) = 3ꢀ,7 cm (ꢀ4,25 in)
larghezza (d) = 28 cm (ꢀ2,75 in) = ꢀ2,75
spessore = ꢀ,9 cm (0,75 in)
altezza (a) = 3ꢀ,7 cm (ꢀ2,5 in)
larghezza (d) = 28 cm (ꢀꢀ in)
spessore = ꢀ,9 cm (0,75 in)
2 laterali:
2 laterali:
altezza (a) = 3ꢀ,7 cm (ꢀ4,25 in)
profondità (c) = 29,2 cm (ꢀ2 in) = ꢀ2
spessore = ꢀ,9 cm (0,75 in)
altezza (a) = 3ꢀ,7 cm (ꢀ2,5 in)
profondità (c) = 29,2 cm (ꢀꢀ,5 in)
spessore = ꢀ,9 cm (0,75 in)
— Montaggio driver —
Anteriore
— Montaggio driver —
Anteriore
Parti apertura --- Tonda
ꢀ tubo: diametro esterno (e) = 8,2 cm (3,25
in)
diametro interno (g) = 7,6 cm (3 in)
lunghezza (h) = 24 cm (9,5 in)
Parti apertura --- Quadra
ꢀ superiore, ꢀ inferiore:
larghezza (e) = 7,6 cm (3 in)
lunghezza (h) = 24 cm (ꢀ0 in)
spessore = ꢀ,9 cm (0,ꢀ25 in)
2 laterali:
altezza (g) = 7 cm (2,75 in)
lunghezza (h) = 24 cm (ꢀ0 in)
spessore = ꢀ,9 cm (0,ꢀ25 in)
Vedere lo schema a pagina 8 - ꢀ3
44
© 2007 directed electronics—all rights reserved
Raccomandazioni per la cassa
sigillata Cobalt CO124S (figura 8)
Raccomandazioni per la cassa
aperta Cobalt CO124S (figura 9)
Dimensioni esterne
A = 3ꢀ,7 cm (ꢀ5,5 in)
B = 28 cm (ꢀ4,75 in)
C = 25,4 cm (ꢀ2 in)
Dimensioni esterne
A = 3ꢀ,7 cm (ꢀ8 in)
B = 28 cm (ꢀ6,75 in)
C = 25,4 cm (ꢀ3 in)
Dimensioni interne
A = 3ꢀ,7 cm (ꢀ4 in)
B = 28 cm (ꢀ3,25 in)
C = 25,4 cm (ꢀ0,5 in)
Dimensioni interne
A = 3ꢀ,7 cm (ꢀ6,5 in)
B = 28 cm (ꢀ5,25 in)
C = 25,4 cm (ꢀꢀ,5 in)
Spessore delle pareti
Anteriore = ꢀ,9 cm (0,75 in)
Laterale = ꢀ,9 cm (0,75 in)
Spessore delle pareti
Anteriore = ꢀ,9 cm (0,75 in)
Laterale = ꢀ,9 cm (0,75 in)
— Parti della cassa —
Forma della cassa: prisma quadrato
ꢀ superiore, ꢀ inferiore:
profondità (c) = 29,2 cm (ꢀ2 in)
larghezza (b) = 3ꢀ,7 cm (ꢀ4,75 in) = ꢀ4,75
spessore = ꢀ,9 cm (0,75 in)
— Parti della cassa —
Forma della cassa: prisma quadrato
ꢀ superiore, ꢀ inferiore:
profondità (c) = 29,2 cm (ꢀ3 in)
larghezza (b) = 3ꢀ,7 cm (ꢀ6,75 in) = ꢀ6,75
spessore = ꢀ,9 cm (0,75 in)
ꢀ anteriore, ꢀ posteriore
altezza (a) = 3ꢀ,7 cm (ꢀ4 in)
larghezza (d) = 28 cm (ꢀ3,25 in) = ꢀ3,25
spessore = ꢀ,9 cm (0,75 in)
ꢀ anteriore, ꢀ posteriore
altezza (a) = 3ꢀ,7 cm (ꢀ6,5 in)
larghezza (d) = 28 cm (ꢀ5,25 in) = ꢀ5,25
spessore = ꢀ,9 cm (0,75 in)
2 laterali:
altezza (a) = 3ꢀ,7 cm (ꢀ4 in)
profondità (c) = 29,2 cm (ꢀ2 in) = ꢀ2
spessore = ꢀ,9 cm (0,75 in)
2 laterali:
altezza (a) = 3ꢀ,7 cm (ꢀ6,5 in)
profondità (c) = 29,2 cm (ꢀ3 in) = ꢀ3
spessore = ꢀ,9 cm (0,75 in)
Montaggio driver
Montaggio: anteriore
Montaggio driver
Montaggio: anteriore
Parti apertura --- Tonda
ꢀ tubo:
diametro esterno (e) = 8,2 cm (4,25 in)
diametro interno (g) = 7,6 cm (4 in)
lunghezza (h) = 24 cm (ꢀ0 in)
Parti apertura --- Quadra
ꢀ superiore, ꢀ inferiore:
larghezza (e) = 7,6 cm (3,75 in) = 3,75
lunghezza (h) = 24 cm (ꢀ0 in)
spessore = ꢀ,9 cm (0,ꢀ25 in)
2 laterali:
altezza (g) = 7 cm (3,5 in) = 3,5
lunghezza (h) = 24 cm (ꢀ0 in)
spessore = ꢀ,9 cm (0,ꢀ25 in)
© 2007 directed electronics—all rights reserved
45
Raccomandazioni per la cassa
Raccomandazioni per la cassa
sigillata Cobalt CO154S (figura 10)
sigillata Cobalt CO154S (figura 11)
Dimensioni esterne
A = 3ꢀ,7 cm (25 in)
B = 28 cm (ꢀ7,5 in)
C = 25,4 cm (ꢀ3 in)
Dimensioni esterne
A = 3ꢀ,7 cm (25 in)
B = 28 cm (ꢀ7,5 in)
C = 25,4 cm (ꢀꢀ,5 in)
Dimensioni interne
A = 3ꢀ,7 cm (23,5 in)
B = 28 cm (ꢀ6 in)
Dimensioni interne
A = 3ꢀ,7 cm (23,5 in)
B = 28 cm (ꢀ6 in)
C = 25,4 cm (ꢀꢀ,5 in)
C = 25,4 cm (ꢀ0 in)
Spessore delle pareti
Anteriore = ꢀ,9 cm (0,75 in)
Laterale = ꢀ,9 cm (0,75 in)
Spessore delle pareti
Anteriore = ꢀ,9 cm (0,75 in)
Laterale = ꢀ,9 cm (0,75 in)
—Parti della cassa—
Forma della cassa: prisma quadrato
ꢀ superiore, ꢀ inferiore:
profondità (c) = 29,2 cm (ꢀ3 in)
larghezza (b) = 3ꢀ,7 cm (ꢀ7,5 in) = ꢀ7,5
spessore = ꢀ,9 cm (0,75 in) ꢀ
—Parti della cassa—
Forma della cassa: prisma quadrato
ꢀ superiore, ꢀ inferiore:
profondità (c) = 29,2 cm (ꢀꢀ,5 in)
larghezza (b) = 3ꢀ,7 cm (ꢀ7,5 in) = ꢀ7,5
spessore = ꢀ,9 cm (0,75 in)
anteriore, ꢀ posteriore
altezza (a) = 3ꢀ,7 cm (23,5 in)
larghezza (d) = 28 cm (ꢀ6 in) = ꢀ6
spessore = ꢀ,9 cm (0,75 in)
ꢀ anteriore, ꢀ posteriore
altezza (a) = 3ꢀ,7 cm (23,5 in)
larghezza (d) = 28 cm (ꢀ6 in) = ꢀ6
spessore = ꢀ,9 cm (0,75 in)
2 laterali:
altezza (a) = 3ꢀ,7 cm (23,5 in)
profondità (c) = 29,2 cm (ꢀ3 in) = ꢀ3
spessore = ꢀ,9 cm (0,75 in)
2 laterali:
altezza (a) = 3ꢀ,7 cm (23,5 in)
profondità (c) = 29,2 cm (ꢀꢀ,5 in) = ꢀꢀ,5
spessore = ꢀ,9 cm (0,75 in)
Montaggio driver
Montaggio: anteriore
Montaggio driver
Montaggio: anteriore
Parti apertura --- Tonda
ꢀ tubo: diametro esterno (e) = 8,2 cm (4,25
in)
diametro interno (g) = 7,6 cm (4 in)
lunghezza (h) = 24 cm (7 in)
Parti apertura --- Quadra ꢀ superiore, ꢀ
inferiore:
larghezza (e) = 7,6 cm (4,25 in) = 4,25
lunghezza (h) = 24 cm (7 in)
spessore = ꢀ,9 cm (0,ꢀ25 in)
2 laterali:
altezza (g) = 7 cm (4 in) = 4,
lunghezza (h) = 24 cm (7 in)
spessore = ꢀ,9 cm (0,ꢀ25 in)
46
© 2007 directed electronics—all rights reserved
DATI TECNICI
Codici parti
COꢀ04S
32ꢀ00
COꢀ24S
32ꢀ05
COꢀ54S
32ꢀꢀ5
Modello
Parametri Thiele/Small
Fs (freq. di risonanza in aria libera, Hz)
39.2
25.6
25.2
7.098
20ꢀ.070
6.08
0.5ꢀ
0.47
3.77
4
Vas (volume equivalente di cedevolezza, cu ft) ꢀ.080
4.0ꢀ7
ꢀꢀ3.790
4.72
Vas (volume equivalente di cedevolezza, litri)
Qms (Q, meccanico)
30.600
3.53
0.68
0.57
3.6
Qes (Q, elettrico)
0.55
Qts (Q totale driver)
0.49
Re (resistenza in c.c., ohm)
Z (impedenza nominale, ohm)
Le (induttanza, mH)
3.55
4
4
ꢀ.38
86.ꢀ
ꢀ.37
ꢀ.6ꢀ
89.9
0.453
ꢀꢀ.5
Efficienza (ꢀ W a ꢀ M, dB)
87.2
xmax (escursione lineare monodirezionale, in) 0.406
0.4ꢀ0
ꢀ0.4075
xmax (escursione lineare
ꢀ0.2925
monodirezionale, mm)
Pe (potenza elettrica continua, watt)
Potenza di picco (acustica, watt)
200
400
200
250
500
600
Mms (massa meccanica mobile totale, grammi) ꢀ0ꢀ.00
ꢀ27
ꢀ95
Cms (cedevolezza meccanica, mm/N)
0.ꢀ80564
ꢀ0.88
0.29472ꢀ
ꢀꢀ.6ꢀ
522.792
8ꢀ.064
0.2ꢀꢀ994
ꢀ4.82
8ꢀ9.398
ꢀ27.055
Bl (fattore di forza elettromeccanico, Tm)
Sd (superficie radiante effettiva, cm quadrati) 346.36ꢀ
Sd (superficie radiante effettiva, sq in)
Gamma di frequenza (Hz)
53.706
39 - 250Hz 25 - 250Hz 25 - 250Hz
Prodotto energia - larghezza di banda (EBP)
Dimensioni fisiche del driver
58
47
49
Volume interno del diffusore (cu ft)
0.048
0.06ꢀ
0.ꢀꢀ6
Diametro esterno del diffusore
(pollici/millimetri)
ꢀ0.3ꢀ/ 262 ꢀ2.40/ 3ꢀ5 ꢀ5.40/ 39ꢀ
Diametro fori di montaggio (pollici/millimetri) 9.23/ 232
ꢀ0.9ꢀ/ 277 ꢀ3.82/ 35ꢀ
Profondità di montaggio (pollici/millimetri)
Peso magneti (Oz)
5.ꢀ2/ ꢀ30
38.60
5.5ꢀ/ ꢀ40
4ꢀ
6.46/ ꢀ64
70
Diametro telaio (pollici/millimetri)
Casse raccomandate
ꢀ0.ꢀ6/258 ꢀ2.2ꢀ/3ꢀ0 ꢀ5.ꢀ6/385
Cassa sigillata tipica (cu ft)
0.75
ꢀ
2
Caratteristiche soggette a modifica senza preavviso
© 2007 directed electronics—all rights reserved
47
PORTUGUÊS
CARACTERÍSTICAS
15
1
2
13
3
4
14
12
5
6
7
11
1
2
3
Cobertura contra pó de polipropileno resistente à umidade e radiação
ultravioleta.
Surround de borracha nitrílica (NBR) grande para longo deslocamento
linear controlado.
Cone de papel ventilado resistente à umidade e à radiação
ultravioleta.
4
5
Carcaça de aço estampado especial.
Bobina de copo Kapton ventilado (10” e 12” usam bobina de 1,5”; 15”
usa uma bobina de 2”).
6
7
8
9
Placa frontal de aço de 8 mm.
Ímãs cerâmicos grandes de duas camadas.
Conjunto de placa traseira/haste em T tipo forquilha de 8mm de aço
Abertura de ventilação de 190 mm. Parte do sistema aperfeiçoado de
arrefecimento da bobina (convecção forçada).
10
11
12
Protetor dos ímãs de PVC.
Bobina de cobre de alta temperatura de 4 ohm.
Ventilação no copo da bobina. Parte do sistema aperfeiçoado de
arrefecimento da bobina (convecção forçada).
13
Aranha Conex entrelaçada com terminais de ouropel costurados em
loop.
14
15
Terminais de pressão.
Gaxeta de instalação de PVC reversível.
© 2007 directed electronics—all rights reserved
49
CONFIGURAÇÕES DE CONExÃO
As próximas ilustrações fornecem diretrizes sobre como conectar o woofer Orion
Cobalt a um amplificador Orion Cobalt para obter o máximo desempenho.
Potência recomendada do amplificador
Potência contínua (RMS)
ꢀ00 a 300
Pico de potência (Watts)
200 a 600
ꢀ woofer
2 woofers
3 woofers
4 woofers
200 a 600
400 a ꢀ200
300 a 900
600 a ꢀ800
400 a ꢀ200
800 a 2400
Paralela – Dois alto-falantes (bobinas de 4 ohm)
Dois woofers com bobinas de 4 ohm com dois woofers em paralelo resultam em uma
carga de 2 ohm ao amplificador.
ꢀ. Conecte o alto-falante em paralelo conectando os dois terminais positivos (+)
juntos e os dois terminais negativos (-) juntos.
2. Conecte os terminais positivos (+) dos woofers ao terminal positivo (+) do
amplificador. Conecte os terminais negativos (-) dos woofers ao terminal negativo
(-) do amplificador (figura 2).
Um alto-falante (bobina de 4 ohm)
Um woofer com bobina de 4 ohm resulta em uma carga de 4 ohm ao amplificador.
ꢀ. Conecte o alto-falante unindo o terminal positivo (+) do woofer ao terminal
positivo (+) do amplificador. Conecte o terminal negativo (-) do woofer ao
terminal negativo (-) do amplificador (figura 3).
Em série – Dois alto-falantes (bobinas simples de 4 ohm)
Dois subwoofers com bobinas simples de 4 ohm conectadas em série resultam em uma
carga de 8 ohm ao amplificador.
ꢀ. Conecte os woofers em série conectando o terminal negativo (-) da bobina do
primeiro woofer ao terminal positivo (+) da bobina do segundo woofer.
2. Conecte o terminal positivo (+) da bobina do primeiro woofer ao terminal positivo
(+) do amplificador. Conecte o terminal negativo (-) da bobina do segundo
woofer ao terminal negativo (-) do amplificador (figura 4).
50
© 2007 directed electronics—all rights reserved
Em série/paralela - 4 alto-falantes (bobinas de 4 ohm simples)
Quatro subwoofers com bobinas de 4 ohm simples, com as bobinas de cada par de
alto-falantes conectadas em série e todos os quatro alto-falantes conectados em
paralelo para resultar em uma carga de 4 ohm ao amplificador.
ꢀ. Conecte o terminal negativo (-) do alto-falante ꢀ ao terminal negativo (-) do
alto-falante 3 e, em seguida, conecte este cabo ao terminal negativo (-) do
amplificador.
2. Conecte o terminal positivo (+) do alto-falante ꢀ ao terminal negativo (-) do alto-
falante 2.
3. Conecte o terminal positivo (+) do alto-falante 3 ao terminal negativo (-) do alto-
falante 4.
4. Conecte o terminal positivo (+) do alto-falante 2 ao terminal positivo (+) do
alto-falante 4 e, em seguida, conecte este cabo ao terminal positivo (+) do
amplificador (figura 5).
Consulte o diagrama nas páginas 4 - 7
RECOMENDAÇÕES PARA CAIxAS
Detalhes da caixa
ꢀ. Dimensões externas calculadas para material de construção de ꢀ90 mm (3/4”) de
espessura.
2. Inclui o deslocamento do alto-falante.
3. Os volumes fornecidos são volumes de sintonização sem acréscimo
4. As caixas possuem uma quantidade mínima de material abafador. É necessário ter
material suficiente para revestir a parte interna da caixa.
© 2007 directed electronics—all rights reserved
5ꢀ
Recomendações para caixa selada
para Cobalt CO104S (figura 6)
Recomendações para caixa ventilada
para Cobalt CO104S (figura 7)
Dimensões externas
Dimensões externas
A = 35,6 cm (ꢀ4 pol.)
B = 3ꢀ,8 cm (ꢀ2,5 pol.)
C = 29,2 cm (ꢀꢀ,5 pol.)
A = 40,0 cm (ꢀ5,75 pol.)
B = 36,2 cm (ꢀ4,25 pol.)
C = 30,5 cm (ꢀ2 pol.)
Dimensões internas
Dimensões internas
A = 3ꢀ,8 cm (ꢀ2,5 pol.)
B = 27,9 cm (ꢀꢀ pol.)
C = 25,4 cm (ꢀ0 pol.)
A = 36,2 cm (ꢀ4,25 pol.)
B = 32,4 cm (ꢀ2,75 pol.)
C = 26,7 cm (ꢀ0,5 pol.)
Espessura da parede
Frente = ꢀ,9 cm (0,75 pol.)
Lateral = ꢀ,9 cm (0,75 pol.)
Espessura da parede
Frente = ꢀ,9 cm (0,75 pol.)
Lateral = ꢀ,9 cm (0,75 pol.)
— Partes da caixa —
Formato da caixa: prisma quadrado
ꢀ topo, ꢀ parte inferior:
comprimento (c) = 30,5 cm (ꢀ2 pol.)
largura (b) = 3ꢀ,8 cm (ꢀ4,25 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
— Partes da caixa —
Formato da caixa: prisma quadrado
ꢀ topo, ꢀ parte inferior:
comprimento (c) = 29,2 cm (ꢀꢀ,5 pol.)
largura (b) = 3ꢀ,8 cm (ꢀ2,5 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
ꢀ frente, ꢀ parte posterior
ꢀ frente, ꢀ parte posterior
altura (a) = 36,2 cm (ꢀ4,25 pol.)
largura (d) = 27,9 cm (ꢀ2,75 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
altura (a) = 3ꢀ,8 cm (ꢀ2,5 pol.)
largura (d) = 27,9 cm (ꢀꢀ pol.)
espessura = ꢀ,9 cm (0,75 pol.)
2 laterais:
2 laterais:
altura (a) = 36,2 cm (ꢀ4,25 pol.)
comprimento (c) = 29,2 cm (ꢀ2 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
altura (a) = 3ꢀ,8 cm (ꢀ2,5 pol.)
comprimento (c) = 29,2 cm (ꢀꢀ,5 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
— Montagem do alto-falante —
Frente
— Montagem do alto-falante —
Frente
Partes da ventilação --- Redonda
ꢀ duto: diâmetro externo (e) = 8,3 cm (3,25
pol.)
diâmetro interno (g) = 7,6 cm (3 pol.)
comprimento (h) = 24,ꢀ cm (9,5 pol.)
Partes da ventilação --- Quadrada
ꢀ topo, ꢀ parte inferior:
largura (e) = 7,6 cm (3 pol.)
comprimento (h) = 25,4 cm (ꢀ0 pol.)
espessura = 3,2 mm (0,ꢀ25 pol.)
2 laterais:
altura (g) = 7 cm (2,75 pol.)
comprimento (h) = 25,4 cm (ꢀ0 pol.)
espessura = 3,2 mm (0,ꢀ25 pol.).
Consulte o diagrama nas páginas 8 - ꢀ3
52
© 2007 directed electronics—all rights reserved
Recomendações para caixa selada
para Cobalt CO124S (figura 8)
Recomendações para caixa ventilada
para Cobalt CO124S (figura 9)
Dimensões externas
A = 39,4 cm (ꢀ5,5 pol.)
B = 37,5 cm (ꢀ4,75 pol.)
C = 30,5 cm (ꢀ2 pol.)
Dimensões externas
A = 45,7 cm (ꢀ8 pol.)
B = 42,6 cm (ꢀ6,75 pol.)
C = 33,0 cm (ꢀ3 pol.)
Dimensões internas
Dimensões internas
A = 35,6 cm (ꢀ4 pol.)
B = 33,7 cm (ꢀ3,25 pol.)
C = 26,7 cm (ꢀ0,5 pol.)
A = 4ꢀ,9 cm (ꢀ6,5 pol.)
B = 38,7 cm (ꢀ5,25 pol.)
C = 29,2 cm (ꢀꢀ,5 pol.)
Espessura da parede
Espessura da parede
Frente = ꢀ,9 cm (0,75 pol.)
Lateral = ꢀ,9 cm (0,75 pol.)
Frente = ꢀ,9 cm (0,75 pol.)
Lateral = ꢀ,9 cm (0,75 pol.)
— Partes da caixa —
— Partes da caixa —
Formato da caixa: prisma quadrado
ꢀ topo, ꢀ parte inferior:
Formato da caixa: prisma quadrado
ꢀ topo, ꢀ parte inferior:
comprimento (c) = 30,5 cm (ꢀ2 pol.)
largura (b) = 3ꢀ,8 cm (ꢀ4,75 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
comprimento (c) = 33,0 cm (ꢀ3 pol.)
largura (b) = 3ꢀ,8 cm (ꢀ6,75 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
ꢀ frente, ꢀ parte posterior
ꢀ frente, ꢀ parte posterior
altura (a) = 35,6 cm (ꢀ4 pol.)
largura (d) = 27,9 cm (ꢀ3,25 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
altura (a) = 4ꢀ,9 cm (ꢀ6,5 pol.)
largura (d) = 27,9 cm (ꢀ5,25 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
2 laterais:
2 laterais:
altura (a) = 35,6 cm (ꢀ4 pol.)
comprimento (c) = 29,2 cm (ꢀ2 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
altura (a) = 4ꢀ,9 cm (ꢀ6,5 pol.)
comprimento (c) = 29,2 cm (ꢀ3 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
Montagem do alto-falante
Montagem: Frente
Montagem do alto-falante
Montagem: Frente
Partes da ventilação --- Redonda
ꢀ duto:
diâmetro externo (e) = ꢀ0,8 cm (4,25 pol.)
diâmetro interno (g) = ꢀ0,2 cm (4 pol.)
comprimento (h) = 25,4 cm (ꢀ0 pol.)
Partes da ventilação --- Quadrada
ꢀ topo, ꢀ parte inferior:
largura (e) = 7,6 cm (3,75 pol.)
comprimento (h) = 25,4 cm (ꢀ0 pol.)
espessura = 3,2 mm (0,ꢀ25 pol.)
2 laterais:
altura (g) = 7 cm (3,5 pol.)
comprimento (h) = 25,4 cm (ꢀ0 pol.)
espessura = 3,2 mm (0,ꢀ25 pol.)
© 2007 directed electronics—all rights reserved
53
Recomendações para caixa selada
para Cobalt CO154S (figura 10)
Recomendações para caixa ventilada
para Cobalt CO154S (figura 11)
Dimensões externas
A = 63,5 cm (25 pol.)
B = 44,5 cm (ꢀ7,5 pol.)
C = 29,2 cm (ꢀꢀ,5 pol.)
Dimensões externas
A = 63,5 cm (25 pol.)
B = 44,5 cm (ꢀ7,5 pol.)
C = 33,0 cm (ꢀ3 pol.)
Dimensões internas
A = 59,7 cm (23,5 pol.)
B = 40,6 cm (ꢀ6 pol.)
C = 25,4 cm (ꢀ0 pol.)
Dimensões internas
A = 59,7 cm (23,5 pol.)
B = 40,6 cm (ꢀ6 pol.)
C = 29,2 cm (ꢀꢀ,5 pol.)
Espessura da parede
Espessura da parede
Frente = ꢀ,9 cm (0,75 pol.)
Lateral = ꢀ,9 cm (0,75 pol.)
Frente = ꢀ,9 cm (0,75 pol.)
Lateral = ꢀ,9 cm (0,75 pol.)
— Partes da caixa —
— Partes da caixa —
Formato da caixa: prisma quadrado
ꢀ topo, ꢀ parte inferior:
Formato da caixa: prisma quadrado
ꢀ topo, ꢀ parte inferior:
comprimento (c) = 29,2 cm (ꢀꢀ,5 pol.)
largura (b) = 3ꢀ,8 cm (ꢀ7,5 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
comprimento (c) = 33 cm (ꢀ3 pol.)
largura (b) = 3ꢀ,8 cm (ꢀ7,5 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
ꢀ frente, ꢀ parte posterior
ꢀ frente, ꢀ parte posterior
altura (a) = 59,7 cm (23,5 pol.)
largura (d) = 27,9 cm (ꢀ6 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
altura (a) = 59,7 cm (23,5 pol.)
largura (d) = 27,9 cm (ꢀ6 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
2 laterais:
2 laterais:
altura (a) = 59,7 cm (23,5 pol.)
comprimento (c) = 29,2 cm (ꢀꢀ,5 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
altura (a) = 59,7 cm (23,5 pol.)
comprimento (c) = 29,2 cm (ꢀ3 pol.)
espessura = ꢀ,9 cm (0,75 pol.)
Montagem do alto-falante
Montagem: Frente
Montagem do alto-falante
Montagem: Frente
Partes da ventilação --- Redonda
ꢀ duto: diâmetro externo (e) = ꢀ0,8 cm (4,25
pol.)
diâmetro interno (g) = ꢀ0,2 cm (4 pol.)
comprimento (h) = ꢀ7,8 cm (7 pol.)
Partes da ventilação --- Quadrada
ꢀ topo, ꢀ parte inferior:
largura (e) = 7,6 cm (4,25 pol.)
comprimento (h) = ꢀ7,8 cm (7 pol.)
espessura = 3,2 mm (0,ꢀ25 pol.)
2 laterais:
altura (g) = 7 cm (4 pol.)
comprimento (h) = ꢀ7,8 cm (7 pol.)
espessura = 3,2 mm (0,ꢀ25 pol.)
54
© 2007 directed electronics—all rights reserved
ESPECIFICAÇÕES
Número do produto
COꢀ04S
32ꢀ00
COꢀ24S
32ꢀ05
COꢀ54S
32ꢀꢀ5
Número do modelo
Parâmetros Thiele/Small
Fs (ressonância ao ar livre, Hz)
Vas (conformidade equivalente, pés cúbicos)
Vas (conformidade equivalente, litros)
Qms (Q, mecânica)
39.2
ꢀ.080
30.600
3.53
0.68
0.57
3.6
25.6
25.2
7.098
20ꢀ.070
6.08
0.5ꢀ
0.47
3.77
4
4.0ꢀ7
ꢀꢀ3.790
4.72
Qes (Q, elétrica)
0.55
Qts (Q total do alto-falante)
Re (resistência à CC, ohms)
Z (impedância nominal, ohms)
Le (indutância, mh)
0.49
3.55
4
4
ꢀ.38
86.ꢀ
0.406
ꢀ0.2925
200
ꢀ.37
ꢀ.6ꢀ
89.9
0.453
ꢀꢀ.5
250
Eficiência (ꢀ W a ꢀ M, dB)
87.2
xmax (excursão linear unidirecional, pol.)
xmax (excursão linear unidirecional, mm)
0.4ꢀ0
ꢀ0.4075
200
Pe (potência máxima permissível
contínua, watts)
Capacidade de processamento de
pico de potência (música, watts)
400
500
600
Mms (massa total móvel, gramas)
Cms (conformidade mecânica, mm/N)
Bꢀ (força do motor, Tesla-M)
ꢀ0ꢀ.00
0.ꢀ80564
ꢀ0.88
ꢀ27
ꢀ95
0.29472ꢀ
ꢀꢀ.6ꢀ
0.2ꢀꢀ994
ꢀ4.82
Sd (área de radiação efetiva, cm²)
Sd (área de radiação efetiva, in²)
Faixa de freqüência (Hz)
346.36ꢀ
53.706
522.792
8ꢀ.064
8ꢀ9.398
ꢀ27.055
39 - 250Hz 25 - 250Hz 25 - 250Hz
Produto de eficiência da
largura de banda (EBP)
58
47
49
Dimensão física do alto-falante
Deslocamento do alto-falante (pés cúbicos)
Diâmetro externo do alto-falante (pol./mm)
0.048
0.06ꢀ
0.ꢀꢀ6
ꢀ0.3ꢀ/ 262 ꢀ2.40/ 3ꢀ5 ꢀ5.40/ 39ꢀ
Diâmetro do orifício de montagem
do alto-falante (pol./mm)
9.23/ 232
ꢀ0.9ꢀ/ 277 ꢀ3.82/ 35ꢀ
Profundidade de instalação (pol./mm)
Peso do ímã (Oz)
5.ꢀ2/ ꢀ30
38.60
5.5ꢀ/ ꢀ40
4ꢀ
6.46/ ꢀ64
70
Diâmetro do cone (pol./mm)
Caixas recomendadas
ꢀ0.ꢀ6/258 ꢀ2.2ꢀ/3ꢀ0 ꢀ5.ꢀ6/385
Caixa selada típica (pés cúbicos)
0.75
ꢀ
2
As especificações estão sujeitas a alteração sem aviso prévio.
© 2007 directed electronics—all rights reserved
55
|